mb6loon Posted July 29, 2012 Author Share Posted July 29, 2012 will be phoning tomorrow so hopefully will get it done this week somtime cant think of anything else being wrong hope not spent enough so far Quote Link to comment Share on other sites More sharing options...
mb6loon Posted August 2, 2012 Author Share Posted August 2, 2012 ok quick update got the valves done still ticking was told it was injector tick anyway of fixing this. would a new set of injectors fix this issue?cheers Quote Link to comment Share on other sites More sharing options...
Krzys Posted August 3, 2012 Share Posted August 3, 2012 Someone had that issue just recently, not sure if they cleaned them up and put back in or replaced? But if they are cheap enough you might as well replace dude! Quote Link to comment Share on other sites More sharing options...
mb6loon Posted August 3, 2012 Author Share Posted August 3, 2012 defently not knocking its like tick tick tick tick on idle and doesn't get louder when reving its just embarrassing hahayeah looking for a second hand set dont supose b16 injectors fit our cars as 1 of my m8s is breakng a delsol Quote Link to comment Share on other sites More sharing options...
mb6loon Posted August 11, 2012 Author Share Posted August 11, 2012 ok somthing else that might be wrong, ie the valves na adjusted right, the sounds coming from cylinder 3 thats where all the damage was done and the sound is coming from the intake valves on cylinder 3 m8 said i should have replaced the valve springs as well.so whats everyones opions on this going to take a vid and upload it for you all to have alook Quote Link to comment Share on other sites More sharing options...
mb6loon Posted August 13, 2012 Author Share Posted August 13, 2012 anyways i think the garage i took it to didn't do it right found the rocker cover nuts lose, so now is booked into honda next friday at 1pm, and there only chanrging £50 wud have been 70 but since am providing the gasket getting it for £50 hopefully this will fix the tapping noise Quote Link to comment Share on other sites More sharing options...
mb6loon Posted August 25, 2012 Author Share Posted August 25, 2012 anyways cars back from honda all sorted valve clearences where well out, so much for the garage i put it to doing the work £70 for nothing, stuck it to honda £94 and its fixed, just wondering if i would have any chance getting my money back from the other garage as they didnt do the work right .honda also changed a cam seal that was leaking and rechecked my timing so its all good Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.