mk1kid Posted December 1, 2009 Share Posted December 1, 2009 hi lads got a mb6 battery died and now srs lights on tried plugging 2 wires into the blank connector whats in the how 2 guide can any 1 help me or shed any light on why i cant get it off Link to comment Share on other sites More sharing options...
jalesi2001 Posted December 2, 2009 Share Posted December 2, 2009 You either aint doing it right, or you have a problem with your SRS system!! The timing is really important when doing the re-set, so follow the guide to the letter and you should be fine. If it doesn't work after a few times, its going to need to be looked at by a mechanic who has the right diagnostic equipment bud!! Link to comment Share on other sites More sharing options...
mk1kid Posted December 2, 2009 Author Share Posted December 2, 2009 basically ive unplugged the yellow plug put a wire in each terminal but made sure its 2 seperate wires tht aint touching then put ignition on and light just stays on never gone out once but weird as was fine before battery died Link to comment Share on other sites More sharing options...
mk1kid Posted December 3, 2009 Author Share Posted December 3, 2009 done it at last lol thanks lads Link to comment Share on other sites More sharing options...
jalesi2001 Posted December 3, 2009 Share Posted December 3, 2009 Nice one, like i say, its a bit trickey, but normally works after a while!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.