Raz s Posted February 13, 2013 Share Posted February 13, 2013 If you have read my build thread my m went in for the test today and failed on front brake imbalance 38%, i understand the pass requirement is 25%Has any one else ha this problem? if so how did you go about it?Also are the civic brake system x-linked so could it be a prob with say the rear right thats making the front left weak?I was thinking of cleaning up my front pads/d**ks, free up grease pistons,bleed one final time.Any thing else any info will be usefull as its in for the retest on saturday morning and i have other bit's and bats to do too.Ta guys! Quote Link to comment Share on other sites More sharing options...
NIKH25 Posted February 14, 2013 Share Posted February 14, 2013 Cleaning up your d**k The best place to start is what you're planning, strip it all down, grease, bleed and replace pads if needed, check the discs for any sign of warping too. Quote Link to comment Share on other sites More sharing options...
Raz s Posted February 15, 2013 Author Share Posted February 15, 2013 ha yeh i do that on a regular basis Well... good news, i rebuild the brakes maing sure everything was really free and copper greased.At first try it would have failed but as the tester was abit of a honda nut himself and he told me to go for a hard drive stamping on the brakes, Then it passed with only 4% imbalance Happy days, i now have a years ticket! Quote Link to comment Share on other sites More sharing options...
NIKH25 Posted February 16, 2013 Share Posted February 16, 2013 Good times. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.