comedywizard Posted March 4, 2013 Share Posted March 4, 2013 Hi, does any one know if you can get a wiring adapter to plug into the cars OBD plug to enable you to use an OBD2 code reader?I've seen a few on ebay but for different pins, not sure what is suitable for these models or are they different depending on year?I ask as I've got handheld OBD2 reader used on newer cars but would be nice to plug it in to the Honda or even diagnostic software.Otherwise it might be down to local garage with my wallet open!!?? Quote Link to comment Share on other sites More sharing options...
WilkesyMB6 Posted March 4, 2013 Share Posted March 4, 2013 Our ECU is a ODB1 with ODB 2 connector i think, so its not possible. Quote Link to comment Share on other sites More sharing options...
Didjeridave Posted March 4, 2013 Share Posted March 4, 2013 Assume you've seen the 'paperclip method'? You can pull codes with a piece of wire! Quote Link to comment Share on other sites More sharing options...
comedywizard Posted March 4, 2013 Author Share Posted March 4, 2013 Yes I read in the manual that you can bridge the pin connectors but havent tried it, might give it a go and see if i can figure it out!Thanks Quote Link to comment Share on other sites More sharing options...
WilkesyMB6 Posted March 4, 2013 Share Posted March 4, 2013 I have done it before, and its worked for me. Not as quick but it does work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.