luporum Posted April 1, 2013 Share Posted April 1, 2013 Hi, I searched about this problem but i have not find the answer. Probably i have some rust in my brain... I have a MB4 and i have to change all of silent block. A lot of this is like EG, someone is only for MB. The questions are:How is the diameter of the anti sway bar? I measured the front and could be 20mm, the rear 17mm. Is it right? I find some camber kit, for front & rear, are necessary if i mount a BC kit (shock absorber) and the car will be 50mm lower than now? Thanks for the answerIl lupo (could be translate in the wolf, but i'm Lupo for my HCI's friends )Bye Quote Link to comment Share on other sites More sharing options...
noodels Posted April 2, 2013 Share Posted April 2, 2013 front camber kit in link. Anything Honda rear camber kithttp://www.ebay.co.uk/itm/BUDDY-CLUB-BU ... 1065wt_721. Quote Link to comment Share on other sites More sharing options...
luporum Posted April 18, 2013 Author Share Posted April 18, 2013 Hi, another question. The rear LCA are different from EG, but i have this and i saw that the difference is on the position of the fork of the shock absorber, but the lenght could be the same. I don't know (have to measure) th width, in the body and in the wheel. If someone has just tried to use the EG's rear LCA, could tell me?ThanksFrancesco Quote Link to comment Share on other sites More sharing options...
luporum Posted May 1, 2013 Author Share Posted May 1, 2013 Anyone can help me? Quote Link to comment Share on other sites More sharing options...
tuominen9 Posted May 23, 2013 Share Posted May 23, 2013 I use eg rear lcas and they fit nicely.you can see them on my topic http://www.civiclife.net/board/topic/142538-kenos-milano-red-mb6/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.