nova2fit4u Posted January 1, 2010 Share Posted January 1, 2010 so a cat bk is nt worth getin on da vti?n my original exhaust is mesd up.so wil they use cat dats already on my car Link to comment Share on other sites More sharing options...
weetec Posted January 2, 2010 Author Share Posted January 2, 2010 once upon a time...............only kidding,,,,you want MIJ performance to build you a cat back exhaust system. then ask MIJ performance to install a de-cat pipe aswell.......but tell them to make the new de-cat pipe to suite the original catalytic convertor, so that in future if you have any MOT issues you can re-install your catalytic convertor to get your MOT, then change it back once youve got your ticket. but if your not in a rush i would get a manifold aswell, around £180 from japspeed, and ask them to fit that too. try to have it all done in 1 go.to install your manifold at this stage is quite important while your new exhaust is fitted, because if you install a manifold after the new exhaust and de-cat pipe at a later date, the manifold mating surface which meets the de-cat pipe may be either too short,too long,the bolt holes may not line up,different size pipes etc etc ,and even worse a new de-cat having to be made, then your original catalytic convertor wont fit, then no ticket. s**t hits the fan. if you buy a top brand manifold, fitting shouldnt be an issue. the cheaper brands tend to be different from original manufacture quality, which why i recommend you get it now and dont take the risk. i did this in the past and pulled the exhaust to the manifold, it was then hitting the floor pan,leaked on joints due to stress, and all sorts. beleive me ive been there, a real big can of worms. it is cheaper to buy a manifold from a retailer than to have 1 custom made. MIJ performance charge around £450 for manifold alone, then they all lived happily ever after. the end Link to comment Share on other sites More sharing options...
nova2fit4u Posted January 2, 2010 Share Posted January 2, 2010 safe il check them out mday.last tym i went in there.they qoutd me 275.tanx 4 dat Link to comment Share on other sites More sharing options...
Moe Posted January 2, 2010 Share Posted January 2, 2010 iv got an integra r exhaust on mine inc manifold which is 2.5" all the way through inc decat Link to comment Share on other sites More sharing options...
weetec Posted January 2, 2010 Author Share Posted January 2, 2010 hmmmm. what does it sound like mate, asin is it loud.? i was going 4 that set up but was advised not to because that 2.5" setup is specifically tuned for type r. thats the difference with tunabi/skunk 2 etc compared to a custom/homebrew setup we have. those exhaust set ups have been designed for that engine to gain maximum power. also I aint really prepared to pay £600 or more for that set up, also couldnt hack noise as i have a family. i was also going for the type r manifold but the flange is the other way too. Link to comment Share on other sites More sharing options...
Moe Posted January 2, 2010 Share Posted January 2, 2010 it is loud due to the decat but i have a silencer that goes into the backbox that quietens it down Link to comment Share on other sites More sharing options...
weetec Posted January 3, 2010 Author Share Posted January 3, 2010 i like your motor, nice. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.