noodels Posted July 19, 2014 Share Posted July 19, 2014 P72 is limited to 115mph btw so would need socketing anywaymine comes in at 5200 rpm with sk2 inlet/cams nice cruzing speeds, think they are 10.5 :1 on the Sri beware "basemap" its just a base mapp9k ecu would be ok for now Hondata 300 would be a better way to go Quote Link to comment Share on other sites More sharing options...
noodels Posted July 28, 2014 Share Posted July 28, 2014 Just tried my pk9 oem ecu,as was running rich on my chipped ecu,=Terriblethat meant a reset in the whole process of the chipped one being replaced,if that works with chipped ecu..does run better now.good to know the chipped one is giving the required with my set up with the sk2 inlet/cams Quote Link to comment Share on other sites More sharing options...
Guest jimbob738 Posted July 28, 2014 Share Posted July 28, 2014 That and the B18C4 doesn't have knock sensors like the c6 so the ecu would throw a CEL, I would recommend a mapped p72 or p28 but if you have the cash as Andrew stated Hondata s300 awesome bit of kit. Quote Link to comment Share on other sites More sharing options...
Guest jimbob738 Posted July 28, 2014 Share Posted July 28, 2014 oh and chrome comes with a standard p72 base map for the b18c6 anyway you would just have to get it mapped specific to you build about 300 quid plus I reckon. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.