Leaderboard

Next up I decided to make a mesh grill myself. Got help from a couple of guys on Facebook who guided me and also followed the guide on the forum and in the end I was so pleased I tried it. I will do a little write up here that should fill some areas not covered in the guide. Here is the grill. I had a spare one to work on which is always a good idea. I opened all the screws at the back and took the surround off Started cutting the slats with a dremmel leaving the areas where the bolts go in the back I cut much more than what was shown in the guide. I only left the areas where the bolts go and cut everything else. I also left the centre where the H fits so that it's easier to fit it Next I placed the mesh at the back of the surround and fit it into the areas where the screws go to hold it in place Then I cut the mesh around the surround After that I just sprayed the mesh and the surround and even the plastic backing all in Pirates Black After that I fit the surround back The I put the H on and fitted the grill back. Love how it's turned out I did realise that the metal bar in the back didn't look as good as the freshly sprayed grill so I sprayed that also and that looked even better Front has started to look good with the mesh grill fitted

Next I decided to sort the fog lights out. Just needed one light which I found in a scrapyard. Yellow glass paint and also colour coded the surrounds. Massive improvement I think Go nicely with the side lights but I am thinking of matching them yellow with the fogs