FREAKBOY
-
Posts
183 -
Joined
-
Last visited
Content Type
Store
Calendar
Forums
Gallery
Downloads
Everything posted by FREAKBOY
-
I had an issue once where it was getting fuel but no spark was a TDC sensor issue, but a few other things could cause it.
-
Sorry Josh I can't remember the lead sequence
-
josh, the whole dizzy is the same age as the turbo, had to change it for the conversion, it's a TD-41u which is quite a common part. I'll admit it, I didn't change plugs or leads since converting.
-
Sounds like the pipe has perished over time, it's been on a few years. I know you were planning the head swap, just to let you know that I don't think your P06 ecu has vtec capability. So if you do the head swap you'll need to address that with an auto P28 or similar, alternatively you might be able to get vtec added in to the board.
-
Don't know if it's any good for you but this link would be a direct replacement if the turbo has actually gone http://www.ebay.co.uk/itm/T3-Turbocharger-Turbo-A-R-42-Stage-III-Civic-Focus-/111504584202?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item19f630ee0a
-
WTF!!! what went?
-
10 was enough for me, have you swapped that wastegate over yet?
-
yes I did the 10psi boost cut in Crome for safety, plus, it can't go over 10.6psi without getting a 2 Bar (or bigger) MAP sensor.
-
Unfortunately CromePro is registered to the machine it's on. If it wasn't you could have had it for nowt. You can always datalog using a free program called freelog.
-
H Josh, there are 4 new spare injector clips in a clear plasic bag in the box of spares I gave you. They're the right ones, you might get away with just nicking the wire clip from one of them.
-
Well guys I put the Freakwagon in for MOT for Josh today and with a bit of minor stuff it passed, so one step closer to heartbreak day . To be fair i'm chuffed someone with Honda passion is getting it Hope the Mrs recovers ok Josh
-
SOLD
-
FREAKWAGON IS NOW FOR SALE ON HERE AND EBAY
-
I didn't get round to covering the gaps, however, the best way to cover it would be to get a spare piece of strip from another deck and simply slide the strips up to each other. Then the bars are off the black strips just slide in the channels. Cover the joins with a bit of black tape
-
It's for sale in classifieds
-
oki doki, I'll do that
-
do I get to post an ad now?
-
Hey guys, just found this thread, apologies for the absence, yes the freakwagon is still alive, but on sorn at the mo, sh1t happens in life as you know and at the moment i've got nowhere to drive her and no dosh to drive her with. Might have to let her go which is gutting
-
A lot of ES Aerodecks have leather, check your local breaker, I've seen a few in yards
-
I think this makes 200
-
Well I've been on here years but never been a post whore
-
Yes and i've got 3 more posts to go lol, make that 2 now
-
my favourite shape civic
-
Civic EG B18 Boosted REBORN UPDATED 28/01/2016 :-)
FREAKBOY replied to 10000rpm's topic in Other cars
sweet -
Using a stock ECU will be a (fairly) hassle free option. Converting to OBD1 will cost more and take more time and may need time on the rollers to get right, however, it does give more tuning options for any future mods
