kalopooo
-
Posts
228 -
Joined
-
Last visited
-
Days Won
32
Content Type
Store
Calendar
Forums
Gallery
Downloads
Posts posted by kalopooo
-
-
Hey! Today was a pretty busy day, but I'm glad that almost everything on the car and it was a completely different car!List installed parts:Coilovers!Rear Trailing Arm!Rear sway bar!Polyurethane bushing for front and rear bars!New rear brake shoes!My impressions are pretty good!The car does not tilt in turns, sits firmly on the road and ride is pretty good except if some sections are bad ...
For now I will drive it like this:Before:
After:
I know not low, but I like it for now ...Rust! Will be treatment! But this time professionally..
-
No no, rotten! It was cold in the morning ....
This is the new window .....
I will show what I'm talking about paint ...After the incident in the first page, the car was painted (not entirely) to the rear doors, because the color was not at all the same in the first application, but not well. And of course it was not done properly then! And after several washes started to peel and the view I do not like ....I hope to be understood! Excuse me for bad English!-
1
-
-
So for this talk, tease me a lot and I'm not sure what is the right solution ..
Take 'new clips, but no one knows whether they will keep the old seal (much sun, rain, snow) has seen over the years ....Or sealed with silicone (transparent) or (black).What advice would you give me!When the weather is warm, it will do for now accept all opinions and decisions.I note that the clips are not broken, but do not hold well. Hold it for a few seconds to a minute and it's ....
-
Thank you! Anyway will repaint the car! And I think to try plasti dip .... But not to protect the original, which is ruined .. There is a time to think over your words and will decide, it is still early ....
-
So! My plates for brake hoses are here .. Thanks a lot BC racing, for what you did.
Today or tomorrow we will photograph the front window and I hope someone can advise what is best for the correction of the problem ....
Plans for the summer! I have a lot of work, but I hope to do most especially hopefully have money for that ...
Complete painting with plasti dip (yes)!
/as an example!Improve sound insulation in the cabin!
Change in the headlights, cosmetic changes!
New speakers for front and rear!
If I can do this, I'll be happy.
-
1
-
-
I replaced the window and of course did not go smoothly ... From the workshop did not do much and had to fix things alone ... But now it's much better ... .However there's more to be desired. Later photos!
-
Hi!
Yesterday I spoke (via email) with BC Racing! And when I read the topic of Dexer (thank you for the pictures), who also bought their coilovers but for EG6, I saw that they have plates for brake hoses .... And when I took my they did. I decided to ask them if there is a chance to buy them now, I do not want the kit, but just themselves plates. Then their answer directly killed me!
They do not just say yes of course, but I was told that I will not be charged for this. I'm just speechless. I like their attitude. Here in Bulgaria are less 'traders' who will do this .... Thanks BC Racing!
-
1
-
-
More clips!
91503-SP0-013 CLIP A, BUMPER
90667-SA0-003B3 CLIP, TRIM, 7MM *NH120L*
91512-SM4-003 CLIP, INNER FENDER
New cover for under the wipers. Old is broken and tease me a lot!
And another new toy .....
I love Tools so much!
-
Hello! Lately I do not have time for the car, but the project continues ....2 days ago I noticed that my windshield was cracked and it will change ....As I prepared with some clips ..... If some of them break (which will happen) hahaha
Here are the numbers of the original ones, if someone need it ....91508-SM4-003 CLIP, COWL TOP91515-SR3-000 CLIP, RR. HOOD91511-ST3-E00 CLIP D, FR. WINDSHIELD SIDE MOLDING91505-ST3-E01ZB CLIP, LINING *NH120L*For red, no number, because generally sold as a kit with several clips..Also decided to change the hoses for the washing system! With cool blue ones with inscriptions samco (probably will get over 10 horsepower) hahahaha ....I do not like the original, especially in winter, I feel that it would break so hard getting into the cold weather ...p.p.For tires .... for several months no problem, either dry or wet ... Much quieter than Debica Frigo 2 .... And much better behavior in the wet ... For snow are just wonderful, no problems ..
-
2
-
-
Because of that my mechanic was busy, we were not able to put in whatever I hoped ..... But I bought a new winter tires!Chose Nokia, hope is not a mistake !!! The model is Wr D3 ....
-
1
-
-
Radiator already installed !!!
-
1
-
-
To, two weeks hopefully no surprises. Will mount almost everything is "stock" in the closet. Before few days came and polyurethane bushing for stabilizing bars ....
Here are the numbers for the 24 mm (front) and 20 mm (rear) ....
-
2
-
-
Maybe I should open a shop?
Or get moving and get some work done? 
-
1
-
-
Liquids are here .....
In a few days will change the radiator because the old will now explode ...: D
-
3
-
-
I decided to do shots! It's a little dirty, but a little ... lol
Washers!
And handles(front)! Not even obvious that they are not original ....
-
1
-
-
Yesterday and today, I decided to do with my car I fixed some things ... Small, but important is the result! Then run the "thing" right ...First I decided to replace the old fender washer with PWJDM which I bought recently and is much better.To waste time I cleared the threads and Grease (thread) again with this grease, which I do not know whether it will help ... lolThen I decided to 'fix right outside handle something because I had not adjusted the fine, but today it is OK! And I noticed that the rear glass run channel
, is wrong!After I fixed it I realized that the left is wrong to! So everything is fine now .... left to wash it .......
-
YES!! hahahaha And to think! How much sweat for them. Finally under the cover ...... lol
-
One day, I just wanted to remove as many interior and clean inside .... But these gave me a problem and of course screwed up the heads of the screws because .... Well, I decided that it no longer bothers me and will be fixed! And help came with PWJDM washers .....
Little! But it was quite "fun"!
-
I'm still here! But I have no time ..... because of my job! Well, from time to time do something on the car. Today I played with these pretty (cheeky) screws (39)
, I hate them but my persistence overcame them and did something more decent and nice to my eye .... I played a lot until they pull (was stuck) LOT!!! I forgot to snap a picture, but tomorrow I will.I cleaned the threads .... I sprayed with silicone .... Then themselves screws (thread), put some grease for marine use!
And I love new toys! Not the best. But work, and it very well ..With them is so easy (lazy)!
,
-
The next thing I want to do is to remove the mechanical rear windows and make them electrically .... What do I need for this purpose? If anyone can help ....
I guess electric motors with lifter, rear handles with knobs, buttons for console and door panels .... Something cables should I do?
Thank you! -
Rear speakers installed .... In the future, insulation of the entire trunk .....
Pictures: Nothing much, but it's far better than just the front ....
Do not watch headcovers backrests I will change them!
-
2
-
-
Radiator is here.
Soon, if and liquids come will be very good ...
-
4
-
-
Radiator was ordered ..... Soon (maybe) will come and antifreeze and other fluids ..... Because I'm thirsty hahahahaThe weather here is horrible and I can not do nothing like people.Maybe soon I will put the rear speakers that sit for 3 years and collect dust. All this soon (how) I do not know. Ha!
-
I'm pretty busy right now, but come weekends (holidays). And I'll try to fix some things ..... The handles are placed and everything is OK with them.
-
2
-
The story of my MA8!
in Honda Civic MA/MB/MC
Posted