-
Posts
4,657 -
Joined
-
Last visited
-
Days Won
24
Content Type
Store
Calendar
Forums
Gallery
Downloads
Posts posted by noodels
-
-
-
Could maybe paint the caps black,
would blend in if need a change,
seen them like that and look different
Opinions are like arseholes every bodies got one and they all stink
-
They just put the prices up %25 before this offer
f**king missed it
-
-
Nice
- 1
-
Need a N/S Drive shaft for mine a corrosion advisory,
failed on rear caliper though and a bulb out !!
retest tomorrow after a new caliper fitted yesterday..
well done Simon
- 1
-
Maybe better cooling needed with a brake ducting kit,can rig up to the front air vents from the front lip
-
Sure its not that black breather <should be strapped up under Manifold>area
could tie the throttle down a bit to clear the bonnet to see if vibe goes.
a mallet sorted my issue out though
-
Plenty ECU s in the Uk be cheeper than getting from Canada
think quote was £600 for sorting mine on the rollers at Eurospec
-
Had yellows in for ages !! ,though no track days,
Got them in the S2000 as well..
-
Come down in price,
shows there making way for the new ones developed,i recon
-
Just got the MUGEN chip burnt from a place a few years back,maybe the place. they wanted to know what mods I had ect ect<its not real mugen btw>
have 5250 vtec and 8900 sounds about right, though don't take it to that on standard Valve train..cost me $25 inc PP
Have skunk2 tuner 1 cams+Skunk intake manifold & DC sport mani DC2 R exhaust Bpipe and a twin loop muffler + fpr
Got my ecu from H tune <had a deal on>
It runs rich but not to bothered its not a daily driver seen 10+mph better top end <indicated>and was picking up speed
-
Test the sensor & circuit with a multimeter maybe just the plug or broken wire somewhere.
-
Look on Lings website and get new longer ones for maybe MB6,it will show length sizes with a reg number.
or get correct length and correct shank length also to suit.
Or a thinner Nyloc nut would do it also.
Or sell them to me
- 1
-
Have new model Accord ones on my S2000 with spoiler shape both sides ect,
look very nice compared to old OEM style.
-
It will never take off
- 1
-
i want one too
-
Glad you like Simon,the filters are huge also..
- 1
-
Looks very nice
-
You need the carriers as well off the ATR<you need to locate Them also as <getting rare>
also <maybe> needs a machining too center the Disc,poss with a wheel spacer over hub before putting the disc on ?<not sure>.
DC2 type R has same brakes as MB6,and on track have little issues with stopping..
<although the ATR engined DC2 at vtec challenge had ATR discs up front>Very competitive...
Ferodo 2500 will give stopping power on OEM set up...air cooling with ducting will work well also..
-
Wheels look nice on the "S"
- 1
-
Also could always go 300mm and 4 pot from the ATR
-
https://civic5.com/forum/topic/3647-mc2-project-chassis-prep/?page=1
This may come in handy
-
Well done on the install,not seen this for a while
- 1
ProCharged MB6 The Build Story.
in Honda Civic MA/MB/MC
Posted
OMG that's nice