[ProCharged MB6 The Build Story.]

lets go!!

 

at this point the car was at home so i want the fogs on so i order some EK fogs as i wanted a big lights instead of the originals 

 

i thought at this time i will also go JDM headlights as well.

 

 

 

 

 

fast forwarding

i got the suspension done,went for the TEIN 

 

 

Before

 

After

 

 

next 

the new Parts came in

FueLab Fuel Regulator

 

 

 

 

New Fuel Line

 

New Fuel Filter 

 

New Injectors,ID 725

 

we first tried the RC injectors but the did suit the setup.

 

 

wile we were doing that job we did custom wiring for the new clips and matching earthing kit.

 

 

 

 

Now for some mapping

 

 

 

 

starting up,feul test

http://www.youtube.com/watch?v=Cvr4xmmruq8

 

https://www.facebook.com/photo.php?v=10150579361705487&l=3805725045573782709

 

 

http://www.youtube.com/watch?v=EJrKz4rPSEE

[ProCharged MB6 The Build Story.]

That must have been so annoying ti have gained so little after sending so much wonga!

i was abit,but new what the problem was and was a little impressed as the car made 180BHP at 5000rpm against a new 1.8 doing 180bhp @ 8500rpms and we were intending to map the car to 9500rpms for the first stage mapping.

[ProCharged MB6 The Build Story.]

on that day well to say we had some issues,

1.the AFR was at wrong,to much air to fuel

2.the fuel injectors couldn't flow enough fuel

3.fuel Regulator was s**t

So we had to limit the car to 5500rpm so the car would topout after that.

the car made 180BHP @ 5000rmp

 

time for some new parts

[ProCharged MB6 The Build Story.]

now was time for the first dyno

 

https://www.facebook.com/photo.php?v=10150579361705487&l=3805725045573782709

[ProCharged MB6 The Build Story.]

After taking the car back to Dynotech to finish the piping and the new Rtect P28 ECU Tuning ECU.

 

https://www.facebook.com/photo.php?v=10150579340780487&l=8550146560543478269

[ProCharged MB6 The Build Story.]

at this point i took the car home,photo before taking it back to finish the piping.

 

[ProCharged MB6 The Build Story.]

here we go,

Piping

first was the mounting of the Edelbrock Intake Manifold,Blox 76mm Racing Billet Throttle body and silicone bend,the inter cooler and ProCharger was mounted to line up the piping.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

positioning the Tial 50mm Dump Value

 

at this point i still had the ebay fuel regulator, sorry car lol

 

 

the windscreen wiper bottle has been relocated ,slim line YONAKA with shoulder and fan

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

filter was sent to the front of the car to sit on top of the inter cooler

 

 

after taking the car home i decided that i wasn't happy with were the piping was as i wanted to put fog back on so we had to rerun the piping.

 

 

the filter piping was sent back into the bay through were the windscreen water bottle use to sit

 

the lighting wires were tucked as we did the piping.

[ProCharged MB6 The Build Story.]

Next Chapter will be rerunning the inter-cooling piping

[ProCharged MB6 The Build Story.]

I had the Block Port and Polished

 

 

After also Skunk2 High Flow Fuel Rail

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[ProCharged MB6 The Build Story.]

 

 

 

 

 

 

 

 

 

 

 

DC2 Crank Shaft next to the MB6 Crank Shaft

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ARP Head Bolts

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[ProCharged MB6 The Build Story.]

this part has about 90 photos of parts

OK,

 

The point of my Build

1.to build a car that is not well-known in the world Honda scene 

2.Use a car that is rare (white MB6)

3.make one of the Honda strongest blocks even stronger (to take 500BHP without a sweat)

4.to build a project hasn't been done and to be current with the latest trends 

5.to be the total build (having Performance(put my foot in your a*s anywhere lol) and Practicality(family car to take the family shopping wile putting my foot in your a*s anywhere lo)  Looks(stance).

6.a build that has never been done (THE ONLY 1)

7.use a system that give the best of NA,TURBO CHARGING and SUPERCHARGING .

the list goes on.

[ProCharged MB6 The Build Story.]

OMG,there are so many photo to go through and the are every were

[ProCharged MB6 The Build Story.]

The Engine Rebuild,Repiping and Parts

 

removing the B18c4 BLOCK.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[ProCharged MB6 The Build Story.]

at this point the bay looked like this.

 

 

 

Rear 

 

 

Front

[ProCharged MB6 The Build Story.]

The Exhaust 

got a 4-1 Manifold for top end power 

then a straight through 3" piping and but they done my cooling piping and it all was s**t,but i was new in the game and I'm learning

 

 

 

 

 

 

 

 

 

 

 

 

Skunk2 4" Megga Flow Exhaust

 

 

 

 

[ProCharged MB6 The Build Story.]

after months of thinking i'm going NA then followed by months of reading parts upgreads.

i came across turbo charging and super charging, which would be better and as a daily,as something that hasn't been done.

i decided the best was super charging,then i came across the VOTECH SuperCharger and the JACKSON SuperCharger then more reading and i came across the Procharged SuperCharger which runs like a turbo but cooler which means more Power

[ProCharged MB6 The Build Story.]

sorry dudes this is going to take some time as this project started in 2007 and the photos are every were and i'm trying to remember step by step lol.

[ProCharged MB6 The Build Story.]

As this was my first build i started with some ebay breathing mods then my first Wheels so 17" Momo wheels multi fit

 

Rocker Cover respray,magnecor race spark plug wire,ngk iridium race spark plugs

 

started looking at the hight and thinkg of getting lowering springs G-Max

 

nankang tyres

 

respray callipers to match rocker cover 

 

 

carbon exhaust back box

 

smoked repeaters 

 

 

[ProCharged MB6 The Build Story.]

One night i was in north London Edmonton and was given a ride home by a friend.

He had a pirate black Aerodeck 1.8 vti,he took me from Edmonton to Islington and needless to say i was bitten by the "HONDA" bug.

i couldn't believe the performance of this family estate......................

 

Next came the fast and furious and that was it,i wanted a MB6,but all my friends had pirate black MB6 so i wanted to get a different colour and after months of looking at MB6s i found  a white MB6 in leeds..................(full story when you see me)

 

my first mod was new wheel studs  on all 4 wheels,

this is the car as standard in 2007 .                                               

                           

 

 

[MB2 TRINITY D. K26. 23/11/14 BRAND NEW MINI MOD ????????]

Very interesting build,I'm keeping a kin eye on this project.

It is Epic.

Would like to see @ South Mimms on the 21/04/2013,representing The MB's.