Jump to content

fyfie5

Member
  • Posts

    3,298
  • Joined

  • Last visited

  • Days Won

    7

Posts posted by fyfie5

  1. :lol: i knew this was coming, was out driving tonight and i have red LEDS for the numberplate anyway so they are quite bright and do light it up, im glad you all like the c5 slogan though, im chuffed with them and i suppose its like a biker having a tiny number plate on the back. the police in my area arent bad at all, i shouldnt think i would get a fine as i got pulled for having very bright blue number plate lights and they just told me to change them :D
  2. fitted my new square plates today, i wasnt too sure about them at first but now i really like them and also the little slogan at the bottom :D

    and im prepared for peoples thoughts on the rear number plate as lots of you wont approve :lol:

    100_3753.jpg

    100_3756.jpg

    100_3757.jpg

    100_3758.jpg

    100_3759.jpg

    took a while to get that horrible glue off that the originals were stuck to WACK11111

    let me know what you guys think.

  3. Don't start the car with it [smash.gif]

    would it actually be bad to start the car with it?

    yes mate

    you will have to take a trip to honda to have the ecu reset and new codes reprogramed :o

    :shock: uh oh better not then WACK11111

  4. Thats pretty good it worked.

    My car is getting the right royal treatment of a good claying etc at the end of this month when I have some time off.

    What clay kit did you use?

    cheers! i know i was suprized it worked on a few other surface scratches aswell! i got a cheap kit off ebay the guy was selling it off cheap as it was left over stock i got it for 3.99 for 100g which is pretty dam cheap compared to the other stuff on ebay!

    Thats a bargain, what were you using for lube? (ooer! lol) Just shamppo, or some quick detailer?

    :lol::lol: yeh just turtle wax quick detailer :)

  5. Thats pretty good it worked.

    My car is getting the right royal treatment of a good claying etc at the end of this month when I have some time off.

    What clay kit did you use?

    cheers! i know i was suprized it worked on a few other surface scratches aswell! i got a cheap kit off ebay the guy was selling it off cheap as it was left over stock i got it for 3.99 for 100g which is pretty dam cheap compared to the other stuff on ebay!

    Thats a bargain, what were you using for lube? (ooer! lol) Just shamppo, or some quick detailer?

    :lol::lol: yeh just turtle wax quick detailer :)

  6. give her a nice back end by throwing a nice spoiler ;)

    hmm i quite like her atm with no spoiler but i was thinking of getting an atr spoiler at one point but thought against it!

    Quick carbon the wood effect trim!!

    i would if i wasnt so scared of taking it off, it just doesnt want to come off without it feeling like its going to snap :o

    any help would be appreciated :)

    take the speedo plastic cover off it has 2 screws on the top which u can see and an another 2 after u have pulled it slightly and popped out the rear fog light switch and the unused one on the right, after u take that off its easy job start pulling the wood effect trim from the right to the left when u get to the center air vent use pliers to remove the cable that changes the air flow, once that done it should come off quite easily, to put it back it the reverse of what i said :) good luck

    thanks for that advice! i aready got round to doing this very carefully a few weeks back it was scary but i got it out with none of it snapping and without removing the plastic cover :D

  7. give her a nice back end by throwing a nice spoiler ;)

    hmm i quite like her atm with no spoiler but i was thinking of getting an atr spoiler at one point but thought against it!

    Quick carbon the wood effect trim!!

    i would if i wasnt so scared of taking it off, it just doesnt want to come off without it feeling like its going to snap :o

    any help would be appreciated :)

    take the speedo plastic cover off it has 2 screws on the top which u can see and an another 2 after u have pulled it slightly and popped out the rear fog light switch and the unused one on the right, after u take that off its easy job start pulling the wood effect trim from the right to the left when u get to the center air vent use pliers to remove the cable that changes the air flow, once that done it should come off quite easily, to put it back it the reverse of what i said :) good luck

    thanks for that advice! i aready got round to doing this very carefully a few weeks back it was scary but i got it out with none of it snapping and without removing the plastic cover :D

  8. Thats pretty good it worked.

    My car is getting the right royal treatment of a good claying etc at the end of this month when I have some time off.

    What clay kit did you use?

    cheers! i know i was suprized it worked on a few other surface scratches aswell! i got a cheap kit off ebay the guy was selling it off cheap as it was left over stock i got it for 3.99 for 100g which is pretty dam cheap compared to the other stuff on ebay!

  9. Thats pretty good it worked.

    My car is getting the right royal treatment of a good claying etc at the end of this month when I have some time off.

    What clay kit did you use?

    cheers! i know i was suprized it worked on a few other surface scratches aswell! i got a cheap kit off ebay the guy was selling it off cheap as it was left over stock i got it for 3.99 for 100g which is pretty dam cheap compared to the other stuff on ebay!

×
×
  • Create New...