raymb6

well so far so good anyways mate the hole behind the side skit wouldnt of helped either

cheers krys i went at it again today as i was off work sick so i removed head lining and all boot trims. opened sunroof and poured water into sunroof drains were working fine but i had noticed that the roof on the pass side near the rear pillar was showing signs of water droplets around it so i took out sunroof drain pipe and checked it for leaks that was fine so then i checked the washer pipe that was fine so i put it all back together again i then romoved the roof strips to fine 2 hair line cracks in roof so i tiger sealed them and refitted them i also tiger sealed the rear washer jet where it meets the roof and i tiger sealed the right hand side top corner of the windscreen as my roof was getting wet where the sunvisor was so iam hopeing by process of trial and elimnation i may have by luck fixed it hopefully

thanks krzys i have allready replace the weather strip for a nother one i got from a breakers as mine was distorted some what. I also checked the tail lights and no joy either. Was wondering could it be coming from water spray as i drive the car might be getting in someplace

sorry lads iam dyslexic intresting to know tom i see one of the lads saying could be the wuater pannel vents he said there was a fix for it how do u fix it.

hi guys i think i allready posted up ages ago about my water leak in my mb6 cant seem to find the link well its gotton to the stage where its really starting to p**s me off the left hand side of my boot is soaked and there is now mould under the carpet the bit of wood over the spare wheel was so wet it tore in 3 places to i took out the spare wheel and there was ducks swimming around in it i also noticed the polisterine box that hold the jack was full of water too then i lifter my rear seat up and the passanger side was soaking as was the rear seat itself its starting to smell so i removed the trims and power hosed the car for about an hour or so to test for leaks but with no joy so then i washed the car and noticed the drivers side skirt was lose at the rear i removed it to find a big hole of rust about 15cm in length and 3cm height so i was wondering was the water getting into the sill and into the car somehow iam getting it plated thurs or friday i cant think anywhere else it be coming in

when I try bouncing the front of the car its solid sitting very low at front high at back I local lad is getting one in for breaking next week or week after so ill take all the oem suspension off his as well as few other bits

I wouldn't fancy them mi I cheddar wheels at 100+ mph has it got euro ncap safety rating

cheers for help lads ill have a look when the 100mph winds disperse and rain stops might be in for a long wait

id say oem shocks on loweing springs front sits way lower than rear and the croads over hear aren't like back home like driving on the moon I not a fan of lowering cars to be honest I like the comfort smoth ride rather than handleing

serious I didn't realise there was that many leaks mate ill have to have a look next day thanks for advise and to make it worse my heater only works on 2 highest settings id say the resistor is gone

either fit s4c or s80 box because the crunching in 3rd is driving me mad put suspension back to stock as it bounces like f**k dangerous at high speeds and hopefully get her into bodyshop to sort out the rust on drivers quarter if I could do that much I be happy

well all is not well with my civic when I got my mb the spare wheel well was full of water so I dried it up and put it down to having open boot as it was parked for a year but now I have the same thing happening but its starting to p**s me off as all the windows are steaming up and not in the way I normally expect them to and I have beads of water running down the inside of the windscreen also just wondering has anyone else had the same problem I have noticed that the sunroof seal doesn't seem to be sitting right but there is some water inside where the blind is and iam thinking there shouldn't be

well guys I was onto my friend he said he can fabricate anything just needs a few pics of what you want making say for example a skunk manifold for the mb6 engines if you could send him a pic of it or any other part that you want made he can give us a price he said if we do a group buy he do us a good deal on post and price ill leave it up to yourse;lves this is his number 07787 524648 dan yapp is his name I cant do much over my end as iam in Ireland lol but ill try my best

right lads leave with with me ill get onto him and get some prices and get back to ya

I just said id put it out there yea iam sure he be able to do that no problem so the aebs mani as pictured above is the upgrade for the mb6 what cars are these off of