[MB Diagram]

Anyone have a diagram on a mb civic for grille? Can't remember how the metal frame fits with the grille onto the bonnet

[Too much Engine Oil?]

Brought 1Ltr of Castrol GTX for my little MB4 as it was close to the low mark on the oil dipstick so I put engine oil in thinking 1Ltr was going to take it close to the full point but its gone over by about 3-4mm - not sure how much that's over by in gallons but should I be concerned?

[Thermostat]

AND a decent aftermarket one? So you want me to get a OEM and a aftermarket one? Lll

[Thermostat]

In the process of attempting to sort out the rising temperature in my MB4 I turn my attention to the said above item.

Where is the best place to get one and best fitment? There's loads on eBay, could try places like Auto parts or Unipart or even genuine Honda?

How long does it take to install as well and could it be done by a non-mechanic?

[Radiator Fan Query]

Sounds like a plan tom! Its bloody annoying as it keeps rising to near the top and then settled back down but not without it staying there for a bit. Bloody annoying my car atm - didn't have this issue with my EJ9 Civic

[Radiator Fan Query]

Not too sure about this but when you turn over the engine should the radiator fan start working straight away? Left car to garage and I mentioned the radiator fan not working and called me few hours later when they got round to looking at car and said the wiring needed cleaning to conduct but driving it back home the temp still rises so assume radiator fan doesn't kick in

[Engine Temperature still rising?]

Well he's checked the power going to the fan with a electric thing (not sure what's it called but plugged to battery terminals) and it moved so its nor a broken radiator fan. Topped up the expansion bottle earlier too. So its something electrical on the radiator fan of thermostat - whatever it is its giving me headaches

[Engine Temperature still rising?]

Kryzs - didn't ignore the advice but had a D16Y8 installed and thought that would sort it lol

Next I will get thermostat checked

[Engine Temperature still rising?]

Think so? How do I check?

[Engine Temperature still rising?]

Think so? How do I check?

[Engine Temperature still rising?]

Think so? How do I check?

[Engine Temperature still rising?]

Haven't checked thermostat and water pump.

But when I took rad cap off the coolant was up to the neck part which is what's recommended. Surely if I add coolant to the coolant tank it will overflow the radiator levels?

[Engine Temperature still rising?]

Had the intake manifold changed to a metal one (D16Y8) and was done by a garage.

Noticed after a while (maybe its the summer and its the heatwave) but the temperature gauge gets close to the red zone. Hot air blows out from the heating and the coolant can be seen at the neck part when you open the rad cap. The coolant on the reserve tank is near the minimum level though?

Do I top up with coolant knowing that the coolant is at neck level when I check the radiator? Or do I check for leaks under the car?

[MB4 Inlet Manifold]

I don't get it? Lol

[MB4 Inlet Manifold]

Here is the pic

[MB4 Inlet Manifold]

Well I've ordered a D16Y8 from him today and seems gd price and he states its in MINT condition though how a Inlet Manifold from a oldish Honda is mint is anyone's guess lol

[MB4 Inlet Manifold]

Thanks that's very helpful

[MB4 Inlet Manifold]

Is a D16Y8 manifold from a CRX?

[MB4 Inlet Manifold]

Thank you reply. I'd prefer a metal one as the plastic part from the intake manifold snapped off causing my carto overheat :/

[MB4 Inlet Manifold]

This is the one Adam is selling

[MB4 Inlet Manifold]

Adam has one but cos its metal (and stock) it doesn't look like the plastic one I have above. Anyone shed some light on whether they do a metal one for the D16? I assume the D14 and D15 has the same plastic inlet manifold?

[MB4 Inlet Manifold]

This is my current one

[MB4 Inlet Manifold]

How do you upload pics from your mobile? I don't have a laptop or computer

[MB4 Inlet Manifold]

Here is a PIC of my current inlet manifold

[MB4 Inlet Manifold]

Was wondering if anyone has a PIC of a METAL Inlet Manifold for a MB4? My one is stock plastic and found this unusual given its role in the engine. Basically my inlet manifold has snapped a connector and needs replacing as the piping route is integral to keeping my engine temp stable. It has been overheating badly but a temp fix by a garage I go to has kept it going but need to source a second hand one. Adam Rafique has a metal one but not sure what if it fits. I will get Adam to post the pix as a reply