Mcd16

Just a quickie, I finished wiring the door speakers in and it's so much better! A lot clearer and central to the hearing. Also I got this fob but can't get it to pair, tried the ignition and button trick, nothing. Tried lockig car pressing, unlocking the rapidly pressing still nothing... I'm expecting someone to say it's the wrong type of fob... Any help? This is it

Yeah that's alright, to e fair it's only one screw holding it in place so I may just unbolt wheel liner I get in.

Had a little faff with the car today. Took the resonator out but left I pipe in. Gunna remove u bit and cold feed it. Need to here the apparent roar > Also all chrome has gone finally. Got a little idea for the boot but wether it'll look any good who know but it will be different I guess. Will be getting a zs180 quick rack as I think mines fooked. So that'll be next update and then Lowering is next on the list

Interesting little read. Lowering a is my next change so been all eyes and ears. Would the zs120 but idea for the mc1 paired with 30 or 40 mm spring? Or the zs180, but how much stiffer with the same lowering springs?

Cheers or your reply. I know I was expecting richness but woerdly, it's not actually changed :S i had an issue removing it where I pulled the pins from the carrier... Oops and because it's fixed in a position overtime it can only have two ways to go in... So far it's not running lumpy or rich? I done a run today to high Wycombe and thought I'd see what I got. Usually about 100miles to £20. My mate out £27 and I got 150miles @85+ the whole time there and back!? God I could of saved what was his money which was then mine in fuel at 70! Hey ho . It'll do untill a proper setup is in pale I guess, it sees a lot more free revving I have noticed a difference, I expected not to due to this silly sensor. Onwards and upwards! Lows hopefully next.

I'm ruling tyres out as this isn't a pull it just a tracking effect on the wheel.. I put it down to the rack. It quick enough to change. Are we sayin mgzs 180 rack swap then before I head to the land of dead cars

Would it be worse running it in, or removing it? I plan to remap when all mods are done.

Hey I am Eco! I try ennit as less frustration on the ice cap goons as much as possible How dogs**te will the car run if I disconnected the O2? Such a p**ss poor idea 2 sensors!

Hey I am Eco! I try ennit as less frustration on the ice cap goons as much as possible How dogs**te will the car run if I disconnected the O2? Such a p**ss poor idea 2 sensors!

I shall investigate! How does rover mg make better bits than Honda... pahaha what am I saying -.-

I'm sure there's 2. I know the lad I got it off to haha, it's not bad it's not rusty just where it's been hot. I can't moan for £10. I'm hoping it'll sort the pressure out in exhaust as back box was smaller so should be more free flowing.

Goodies!!! One managed to get a decat pipe, and behold, the "praise like" pic!... I paid a absolute tramp like 10 whole pounds!! Yeah budget bits. Love them lol. I shall attach this b****r tomorrow and update! Quick q and a as usual from me. How important is the second i2 sensor on these? I'd prefer it gone but if I need it. I guess I can keep it

Ah cool I'll look into it then, thanks bud!

Thanks for the reply people. This mg quick rack? Standard thing on the zs spec I guess? Lol hate stuff being new to me

I've got abit of a problem that I pray some of you can help with. The steering on my deck is delayed. One minute it seems tracking it out one way, then it's the same the other!? Sometimes turning it takes it's time catching up or even straightening out hence the "tracking out" effect. I don't think trackings out but something's causing it. Power steering has visually leeked in the past but I think thats an old fault as the levels not dropped. Any ideas!?

No worries pal, any chance of a message on this Hub setup? Would love the bbs on my deck

Interior looks nice mate, loving the lever of love too didn't agree with the wheels but after getting it on it's a*s, looks amazing!

Just scanned threw what you have been doing and i say your doing a great job, proper impressed with chopping the chassis up to be fair! Ive got some 4x114 bbs wheels if your after some or te swap? If love to put them on my deck, why hubs are they your putting on dc2? If it's just a Hun pull and push job I may consider it. Great work!

Hmm defo need abit of waiting haha. People talking about under steer and that, am I the only one who's deck has oversteer? Going round a roundabout other day when raining and the backed went? It does it in the dry to with moderate driving style

Both them decks look great! Do you have te same setup then grant? How much are these coilovers with discount. I ideally need a cheap setup untill save for a while

Both them decks look great! Do you have te same setup then grant? How much are these coilovers with discount. I ideally need a cheap setup untill save for a while

Sweet it a little lower then. I might look at the 120 then and go from there I think cheers for that! Only concern is the little man Idont want too stiff and so far I havnt read anything on f the setup is stiff, mg120 seems the safer bet at the moment and if needed, lower the spring thanks

how many lows did that give you? I've heard that either front or back actually raise it :S I think I need to have a look on my car to see about the milling and get an idea of it all. Would it be too stiff/low with added 30mm spring drop? Always put my nose up at rover/mg, but I can do abit of arse licking for a gain I guess! The bits are a straight swap If I'm not mistaken? Remove from mg, install on mc...?

I'll abit I'm abit of a virgin f***y with the strips on these. Lowering forks? Care to explain this setup for me and springs used? I'm use to the basic lower arm McPherson strut and these have bits hanging out it's arse for suspension

I will most probably go down the route of mgzs. It seems cheapest and most econimal money wise on new parts. Fleabay sells them £80 for 40mm drop. I just don't wanna stiff setup. Also heard the amber goes POSITIVE with mgzs is this True? Really great help already on here guys! Thanks