leaper1989 Posted April 7, 2010 Share Posted April 7, 2010 hello peeps before il start thought i would ask the people who know the MBs very well how do you fit the washer for the headlight?? do i have to take the bumper off?? can anyone help me please 1"£££$££" Link to comment Share on other sites More sharing options...
Guest paul-mb6 Posted April 7, 2010 Share Posted April 7, 2010 you have to remove the bumper but it's easy to get off Link to comment Share on other sites More sharing options...
jalesi2001 Posted April 7, 2010 Share Posted April 7, 2010 Yep, you need to remove (or part remove) the bumper, and they are held in with metal springy clips which you will also need, plus a special clip (or very small jubalee clip) for the hose. Link to comment Share on other sites More sharing options...
MBBREAKERS Posted April 7, 2010 Share Posted April 7, 2010 guess it turned up in the post then fella Link to comment Share on other sites More sharing options...
SteveMB6 Posted July 30, 2010 Share Posted July 30, 2010 Yep, you need to remove (or part remove) the bumper, and they are held in with metal springy clips which you will also need, plus a special clip (or very small jubalee clip) for the hose. Where can I get one of these metal springy clips from ?One of mine is held on with black silicone, looks untidy, also the jet itself never stays in the outer casing properly. Link to comment Share on other sites More sharing options...
WilkesyMB6 Posted July 30, 2010 Share Posted July 30, 2010 Talking about head light washers, is there a blanking plate for them? Or did the lower spec cars come with a bumper without holes? As mine done work and i can't be bothered to replace the bottle with the pump in. Link to comment Share on other sites More sharing options...
jalesi2001 Posted August 8, 2010 Share Posted August 8, 2010 Lower spec cars came with a bumper without holes... You can get the clip from Honda, let than £2 i think, or a scrap car.. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.