Sean_GT Posted June 29, 2010 Share Posted June 29, 2010 after coilovers and not getting alot of luck for the MB Link to comment Share on other sites More sharing options...
strictlyboost Posted June 29, 2010 Share Posted June 29, 2010 i fitted my coilovers from my mb6 on to my ek4, so theres no reason why it cant be reversed Link to comment Share on other sites More sharing options...
s11aba Posted June 29, 2010 Share Posted June 29, 2010 yh they will fit i bougth mine of a guy who had them on a ek4 Link to comment Share on other sites More sharing options...
tontvti Posted June 29, 2010 Share Posted June 29, 2010 Yes, they both use the same fork type fitting.You can also use DC2 suspension if you fit DC2 lower control arms at the same time (eye type fitting not fork).Also from my searching EG rear suspension will fit if you use a 5mm spacer either side of the fork (some of the universal suspension kits actually supply this) or you can swap an EG bushing into the EK/MB lower control arm.Or you can use EG rear control arms with the EG suspension.But you can only use aftermarket EG rear control arms with EK/MB suspension if you can either file down the bushing or swap out the bushing for a smaller EK/MB one.MB/EK rear suspension 40mm Fork typeEG rear suspension 50mm Fork typeDC2 rear suspension Eye typeHope that helps, there's lots of options Link to comment Share on other sites More sharing options...
Dave Posted June 30, 2010 Share Posted June 30, 2010 Nice one Tony! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.