wezza9 Posted October 10, 2010 Share Posted October 10, 2010 i have a set of jamex springs and i have bought a full set of MG 180 dampers but while stripping them i split the top of one of the fornt the alen key holes (can not put pic up ) so do i A ) get more MG fronts with jamexB ) get ITR front dampers with jamexi will fit the fit the Mg rears with jamex Link to comment Share on other sites More sharing options...
noodels Posted October 10, 2010 Share Posted October 10, 2010 can you not hacksaw through the remaining nut?and put new nuts on so can use wot you have!!the cheeper option..get workshop too whip them off!they prob come off with a windy Link to comment Share on other sites More sharing options...
wezza9 Posted October 10, 2010 Share Posted October 10, 2010 i did garage broke end off to the depth of the alen key said they will not take it off any farther (it is a bit my fault i did not wire brush and WD40 the thread i had done the other front but not this one ) quick tip lol i am sorry for the hijack so which would people recomend ? Link to comment Share on other sites More sharing options...
noodels Posted October 11, 2010 Share Posted October 11, 2010 makes a change from me, no worries mate Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.