beaniexx Posted February 26, 2011 Share Posted February 26, 2011 hi all im looking to possibly use a cold air feed by cutting a hole in front bumper??? drastic i no lolmy question is ,, any good ideas of how i could make it look good as dont fancy just seeing a hole???thanks Link to comment Share on other sites More sharing options...
johngreen537 Posted February 26, 2011 Share Posted February 26, 2011 Pipercross cold air feeds mate, £25 for 2 in halfrauds. [url[http]My fogs were dead, so I re-used the fog light holes! Link to comment Share on other sites More sharing options...
beaniexx Posted February 26, 2011 Author Share Posted February 26, 2011 Pipercross cold air feeds mate, £25 for 2 in halfrauds. [url[http]My fogs were dead, so I re-used the fog light holes!yep thats exactly what i had in mind.... thanks now just gotta brave the drill lol Link to comment Share on other sites More sharing options...
johngreen537 Posted February 26, 2011 Share Posted February 26, 2011 lol, get one of the pripercross things, then drill the hole loosley and put the pipercross in, seal around the edge with black silicone mate! Hides a multitude of sins Link to comment Share on other sites More sharing options...
KiNK43 Posted February 26, 2011 Share Posted February 26, 2011 If you dont fancy drilling. I used tumble dryer hose, slotted it over cone filter andNylon tied it in the opening below grill. But otherwise like said theres flared pieces available like pipercross. Can be cheapy cheap on ebay. Link to comment Share on other sites More sharing options...
johngreen537 Posted February 26, 2011 Share Posted February 26, 2011 Yeah, I only used the pipercross as I was already in halfords. Cheapy cheap ones will work exactly the same Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.