RS1T Posted July 8, 2011 Share Posted July 8, 2011 Just had a look through the Honda Service manual (The one provided by the site), but I can't see where it tells you how to tighten the alternator belt. If someone could either tell me how or give me the page reference that would be much appreciated. Link to comment Share on other sites More sharing options...
KiNK43 Posted July 8, 2011 Share Posted July 8, 2011 2x 12mm bolts. pretty self explanatory when you look at the alternator. just slides on its bracket. Link to comment Share on other sites More sharing options...
RS1T Posted July 8, 2011 Author Share Posted July 8, 2011 Do you need to remove anything to access these bolts? Where abouts in the engine bay are they located? Thanks Link to comment Share on other sites More sharing options...
KiNK43 Posted July 9, 2011 Share Posted July 9, 2011 aircon pipe and few bits just unclip and you can get your hand down. use a 12mm ring spanner or socket.its on the right hand side of engine as you look at it under intake manifold. Link to comment Share on other sites More sharing options...
civicturbo79 Posted July 9, 2011 Share Posted July 9, 2011 They are a bit of a pain but its just a jake says . Rich. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.