AJM23 Posted September 15, 2011 Share Posted September 15, 2011 I need to replace an ABS sensor for my MOT on my MB3. Will any ABS sensor for an MB3 fit at any wheel, or would I need a different one for my front drivers side than I would for my rear driver side? Basically is it one ABS sensor will fit fine at any corner of the car? Many thanks, Andrew. Link to comment Share on other sites More sharing options...
WilkesyMB6 Posted January 20, 2013 Share Posted January 20, 2013 I have always bought the one for the corner I needed, but you do have a good point. Does anyone else know the answer to this? Link to comment Share on other sites More sharing options...
philgor Posted January 24, 2013 Share Posted January 24, 2013 i should say, the abs sensor's are the same side to side, but not front to rear, but can't be sure till we've seen them side by side. Link to comment Share on other sites More sharing options...
noodels Posted January 24, 2013 Share Posted January 24, 2013 as above i recon also a rear will prob do front and loose the extra cable in a loop +a tie strap Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.