stevovti-s Posted June 17, 2012 Share Posted June 17, 2012 I'm getting all the parts I need ready to fit a B18c6 into my MB6, but I'm not sure which hoses to buy. The car currently has no engine or rad, so I'm going to buy a set of silicone hoses, but does anybody know if the hoses on a B18c4 take the same route as on a B18C6? ie: if I buy a set designed for the 1.8 Vti, will they still fit the B18c6 motor?Steve Quote Link to comment Share on other sites More sharing options...
NIKH25 Posted June 17, 2012 Share Posted June 17, 2012 Probably depend on what rad you're getting. DC2 has a bigger rad so would think hoses are routed differently. The block should be the same though so if you're using MB rad they should be the same. Not a great answer I know, sure somebody could give you a better one. Noodles, Johngreen. Quote Link to comment Share on other sites More sharing options...
james Posted June 17, 2012 Share Posted June 17, 2012 CIVIC INTEGRA there is a differance Quote Link to comment Share on other sites More sharing options...
stevovti-s Posted June 19, 2012 Author Share Posted June 19, 2012 I was planning on using an aftermarket aluminum rad, or a standard DC2 one if funds dictated so. Thanks for your help fellasSteve Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.