podge Posted October 1, 2012 Share Posted October 1, 2012 just thinking would the wiring loom be the same to swap my b18c4 mb6 to itr b18c can get them engine cheap here in ireland for 800 euro and to get 200 bhp out of b18c4 would cost alot more that! don't want to do it if the wiring loom isn't right Quote Link to comment Share on other sites More sharing options...
simpo Posted October 1, 2012 Share Posted October 1, 2012 I know you will need a conversion harness for the ecu Quote Link to comment Share on other sites More sharing options...
podge Posted October 1, 2012 Author Share Posted October 1, 2012 would the wiring be the same at the engine side on the intake for the sensors? new to the mb6 love the car but would like itr motor in it Quote Link to comment Share on other sites More sharing options...
wilp99 Posted October 19, 2012 Share Posted October 19, 2012 just thinking would the wiring loom be the same to swap my b18c4 mb6 to itr b18c can get them engine cheap here in ireland for 800 euro and to get 200 bhp out of b18c4 would cost alot more that! don't want to do it if the wiring loom isn't right FYI- itr pistons, 98+itr cams, b16 head/itr manifold on a c4 = itr engine and ~180 Wheel hp.. (~210bhp) and obviously a tune..the wiring loom is right, you just need a obd1 itr ecu. is the b18c obd1 or 2? either way, the sensors/distributor from your c4 will directly swap over, you just need to wire in the knock sensor for the 18c's ecu. Quote Link to comment Share on other sites More sharing options...
civicturbo79 Posted October 20, 2012 Share Posted October 20, 2012 The wiring will be fine . Rich. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.