hickster Posted November 19, 2013 Share Posted November 19, 2013 There must be plenty of cheap preludes about. Half decent red tops are holding value, MB6 would be cheaper but you may get lucky. B 20 tad more torquey. With a vtec head on they usually make around 185bhp.B20z is the better choice for higher rpm.Also f series used in prelude and accord is very different to s 2000 engine.It's more like a larger displacement d series. Sohc! X2 The S2K longitudinally mounted f20 is a different high revving beast. The H22 is popular for drag spec EG's and the like but is a big engine and a lot of work and cash to fit in an M; much better left in the superior Prelude shell if possible. I mean a lot of cash even before the punitive insurance and tax costs. and the sump is very very low in the ones I've seen. B20b or Z1 out of crv would be good but arnt they slower/underpowered compared to B16 B18? Also would the running gear fit aswell, looked on wiki and says the JDM domani MB6 was offered with a 4X4 system borrowed from the crv! Yeah had a look at this before- certainly seems a possible conversion with a bit of underfloor chopping. Not many people seem to like the part time system in the CRV though. Quote Link to comment Share on other sites More sharing options...
skitzma8 Posted November 19, 2013 Author Share Posted November 19, 2013 Well I'm deffo going to go for a B series or H series going to buy complete car as it will have most of the things I need, and if I get MB6 a lot of other parts will go to use Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.