C0mr4d3 Posted September 6, 2014 Share Posted September 6, 2014 Hi guys the thing is that just yesterday ive fitted a direct admision to the mb1 its sounds awsome but i cant hear the vtec kicks in the engine have been taken to inyection cut several times but i couldnt hear or feel the vtec kicking the engine its a d16y2 vtec oil have been changed 500 miles ago it has castrol gtx 10w40 and the level its ok, any suggestions? havent feeded 12v to the solenoid yet, also the engine leaks oil by the vtec solenoid or arround it but very very few, also leaks by the carter but it doesnt get to the floor Quote Link to comment Share on other sites More sharing options...
Krzys Posted September 8, 2014 Share Posted September 8, 2014 Most of that I suspect could be translated into English..... I think, if I've gotten the gist of it, you probably need to a new solenoid from what I can make out. 2 Quote Link to comment Share on other sites More sharing options...
Mr Brown Posted September 8, 2014 Share Posted September 8, 2014 Em as above, try testing the solenoid first see if it is doing its job. Quote Link to comment Share on other sites More sharing options...
C0mr4d3 Posted September 8, 2014 Author Share Posted September 8, 2014 ok guys will do sorry for my english @Krzys will let u know cheers Quote Link to comment Share on other sites More sharing options...
C0mr4d3 Posted September 16, 2014 Author Share Posted September 16, 2014 ive sorted it out mate, solenoid gaskets replaced and the filter was dirty, vtec now engaging at 5.5 rpm Quote Link to comment Share on other sites More sharing options...
Krzys Posted September 16, 2014 Share Posted September 16, 2014 Awesome! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.