C0mr4d3 Posted October 2, 2014 Share Posted October 2, 2014 hi guys need some help to find inner tie rods for my mb1, it doesnt says anything about inner tie rods on the workshop manual and on japancars.ru there is no reference for it, i have heard that they are m14 on both sides but the ones i can find are m12 inner and m14 outer can anyone help me thanks in advance Quote Link to comment Share on other sites More sharing options...
KiNK43 Posted October 2, 2014 Share Posted October 2, 2014 Pretty sure they don't come out on mb racks. Please someone who has one could verify that? ?Obviously dc2 eg can replace inner joints but I'm sure I've looked into it before and on mb it's a new rack job if there's play Quote Link to comment Share on other sites More sharing options...
C0mr4d3 Posted October 2, 2014 Author Share Posted October 2, 2014 OMFG really? Quote Link to comment Share on other sites More sharing options...
C0mr4d3 Posted October 2, 2014 Author Share Posted October 2, 2014 there´s play and a big noise too Quote Link to comment Share on other sites More sharing options...
C0mr4d3 Posted October 17, 2014 Author Share Posted October 17, 2014 well just so you know, they do come out, a little bit complicated but they do, inner tie rods are m14x1.5 on both sides and 170mm long Quote Link to comment Share on other sites More sharing options...
Andorfy Posted July 20, 2015 Share Posted July 20, 2015 well just so you know, they do come out, a little bit complicated but they do, inner tie rods are m14x1.5 on both sides and 170mm long Hello! I have the same problem whit my MB1. Can you please help me where can I buy this size of inner tie rods, or what part number should I look for? I googleing more than two days, but I didn't find anything. Thanks in advance! Quote Link to comment Share on other sites More sharing options...
marko-ivanic Posted June 27, 2016 Share Posted June 27, 2016 Hi guys.. i am new member, i only registered because of this topic.. Sorry for bringing up this old thread.. Im going to put mb suspension to my civic ek, but i cant find anywhere tie rods with m14 inner thread, only with m12.. I was in 3 shops this morning and all of them had only with m12 inner thread.. Can you help me, did you find tie rods? Do you know if maybe some rover part fits? Quote Link to comment Share on other sites More sharing options...
Andorfy Posted June 27, 2016 Share Posted June 27, 2016 Hi Marko! A few days ago somebody asked the same in the Hungarian Honda Forum, and finally find some aftermarket part numbers, hope this can help for you: MAPCO 49911 FIRST LINE FTR5239 YAMATO I34023YMT Quote Link to comment Share on other sites More sharing options...
marko-ivanic Posted June 27, 2016 Share Posted June 27, 2016 Wait, you are sure these part numbers are for both sides m14 tie rod? Because i already found tie rods with m12/m14 threads Can you send me link for these hungarian honda forum topic? Thanks A LOT!! Quote Link to comment Share on other sites More sharing options...
Andorfy Posted June 27, 2016 Share Posted June 27, 2016 I checked on google, the first two has a datasheet what says each end of the rod is m14. For the third I couldn't find the exact datasheet. Here is the exact link for the mentioned question and for the answers: https://crxforum.flix.hu/showRecAnswers.php?topicId=5&commentUniqId=57615524160fe&seed=57714fdacb1c3&forumSessId2=aab303a7788c702e85d9b415829a0e30 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.