Leaderboard

Quiet Sunday on the car, got a lot of little jobs done. Completed the engine side of the loom, just leaves the ECU and dash loom to do Bought the proper crimping tool for this job, glad I did otherwise I'd still be there now trying to sort all those pins! Every wire checked and rechecked, fitted and notes taken so I can build the other side! Got the carbon roof bung back. Not happy with it to be honest - I needs a lot of work but I cut the edge off and test fitted it for now Narrow gap to fill in with sealant. Also going to secure it with some fixings but I'll need to make those when i get time. One job I hated doing before was getting the bushes out of the front arms - had to do it again as I ended up giving one of my polybushed arms to my brother for his MB6. Got a new arm and decided to clean up and powder coat both and put new bushes in - step 1 was drill/press the old ones out Started to add the buttons for the dash to the binnacle. Messed up the holes in the carbon panel (too big) so will have to make another carbon plate but I'm happy with the fit and placement. Need to make some labels but it's just 4 buttons on the right. Left panel will be lights and wipers. Rebuilt the off side doors with everything bar the rubber seals. Took a bit of working out as I didn't strip everything into bags like I did with the rest of the car but it went back together in the end. Need some longer bolts to hold the perspex windows in as the ones I've got in there now are a little too short. Easy fix so not worried right now. Got the roof bars on too. Really do love the blue now it's being broken up by the black trims and parts

looking good mate! if you need any genuine parts, i can get hold of em pretty cheap