weetec
-
Posts
1,037 -
Joined
-
Last visited
-
Days Won
2
Content Type
Store
Calendar
Forums
Gallery
Downloads
Posts posted by weetec
-
-
Alastair.. very posh i must say
... i ripped the boot seal towards the bumper to allow any trapped water to flow out rather than in. youll see the result just after a rainy day as the leftover spills of water are left dripping down the bumpers. right where the taillights are...as for the front.. well.. i practically siliconed the entire left of the car around that area... the only thing i can think is the water is washed in as the wheels spin. only saying this because i had to repair/weld a plate on the drivers side underfloor pan as this area was rusted. passenger due for this summer too,,, and then you think
does it only happen when its parked 
-
mines been like that for months.. great indication its working on low speed.. as they are a little too quiet..
-
you probably know by now..its b****red... or may be possibly jammed.. routine maintenance helps... silicone spray down the rubbers frrom halfrauds.. bout £4
-
You sure you didnt airlock the water ways to the IACV?... make sure both pipes get hot which would prove water circulation. Then get a can of throttle cleaner and spray around throttle area.. if the engine dies you found your leak....
-
Lol... that was my donor car to make my current m..... it had a project thread but my computer give up n lost all the pics....its such a small world... they were my previos alloys on vtecmaniacs thread..
-
just for you..
-
Little update.. wheels filled n sanded ready for paint....
-
Just for filling n sanding... gonna have to find somewhere to spray them.....
-
Hi people.... my wheel refurb contraption....... it spins too
-
Really need one mb6, rotor arm seized on, bottom bolt sheared off on cap, damp has got it, losing the will to live not being able to drive it, anyone?
I got 2...... im in manchester.. neither work but good for spares.. pm me your number and i will ring in the morning
-
more gd stuff, put fuel in her and changed the fuel filter and she runs and sounds great. Alos bought a single fanblade wheel from weetec so she will be complete very soon!
That wheel got nowt to do with me... lol... its just i been scowering ebay for alloys over the last fortnight and spotted them...
-
Thats would be civic Ek9 b16b... barely noticable though... just laying low. Really happy with suspension set up.steves the lucky man who snapped up the cam on ebay. Its open topic but id strongly advise suitable springs.
-
Im well gutted.. sold up..
-
96 Jdm all the same...hows your set up noodles?
-
Hi steve
... you the guy from ebay???... strongly advise those springs. Its a risk however stay on the safe side....heres a pic of the cams shame the springs werent bought with them too...naz
-
oops double post
-
cheers guys. having spoken to meister R their spring rates are slightly different with their range from the eg to ek to MB, however on the MB the other difference is the rear bottom holders are longer in length. ....
so i contacted BC and they are able to sell me extended rear bottom mounts for this MB application.
the other differences are the different springrates other than that its all the same construction. these have 30 adjustments from rock hard massage to lovely and smooth. these are excellent
. and i certainly did not pay £650.. 
... we will leave that a secret. 
-
Hi peoples. A set of coilovers fitted..
-
no arh gap and gunmetal grey
![[smitten.gif]](https://civic5.com/forum/uploads/smitten.gif)
ill give a look for the sticker's. cost me £20 to have 6 made. personally id have a custom de-cal made of your own choice 
vti-s... hint hint. -
bloomin miss them wheel's.. sold them cheap to a lad in birmingham and now they made their way to you
for 16"'s they have a very good offset ET38. innovit make good wheel's. i may still have some spare sticker's somewhere lying around. i'll see if i can dig them out. had them made at a vinyl sign shop local to me. -
hey
i swear they my old wheels
-
look
vti-s mats on ebay! -
have a read of this
http://honda-tech.com/showthread.php?t=3005484
and this
Same peak Horsepower figure yes.
with the 98 the peak torque witch is 137lbft comes in at 6200rpm where as with the 96 the peak torque is only 133lbft an comes in right up at 7500rpm.
Makes for a much more usable power band. Plus at the end of the day Torque = Acceleration
Plus the 98spec is a full Stainless mani so its miles lighter than the cast 96spec.
-
the 98 spec 4-1
http://www.japperformanceparts.co.uk/ca ... ry=Exhaust
the 96 spec 4-2-1
http://www.ek9.org/forum/sale/6935-96-s ... ifold.html
they both are 2.5" collectors
NOODELS MC2
in Honda Civic MA/MB/MC
Posted
EXACTLY WHAT IV DONE!!! you wont be dissapointed
itll be so quiet now.. i used the ITR silencer/resonator too..i even have the ITR backbox on mine, just need to get the tail pipe sorting
its a tricky fit
.. to be honest all this big exhaust crud.. stick to genuine tested honda stuff
you might theres no vtec noise but hey... inconspicious 
and none of that horrible rattle resonance generated from the manifold.. you can now tootle around quietly ![[smitten.gif]](https://civic5.com/forum/uploads/smitten.gif)