[MC2 lowering questions]

thanks to noodels i have found front and rear set, only to think how to send them as cheep as possible, because custom costs here depends of how mad officers wife was the night before

is possible to allso find arb on ebay?

[MC2 lowering questions]

Not sure how the stock mgzs set up performs tbh, as I put the Eibachs straight on but you can be sure it will be a massive improvement over the Honda stuff.

music to my ears

thanks mate

if i found only rear mg shocks, on front i can mount some integra, ek9 or some aftermarket set, but the rear end sus is problem, as it is to all of us

[MC2 lowering questions]

yeah, the linking diferencies as obvious

but isnt mg-s too stif because of no ball joints?

[MC2 lowering questions]

thanks man

if its 15-20mm i am good with that, at least for the cheap start . allso 55 is a bit low for ocasional tow car

how does stock zs shocks and springs perform cornering?

[MC2 lowering questions]

ok, i saw yesterday that there can be found some parts, but if you hear for some parts not on ebay, please do tell

what is gain on handling and ride hight with these combinations

1. zs shocks, springs and honda arb (chipest, and easiest to find and built)

2. zs shocks, eibach or koni springs and honda arb

3. zs shocks, springs and mg zs arb

4. zs shocks, eibach or koni springs and mg zs arb

meny people here say only nice words for mg shocks, but i would like to know is the first combination enough to lower the car and make it perform apexes much better, or you warmly recomend combinations 2, 3, and 4

[MC2 lowering questions]

after some reading, i saw that mgzs180 suspension and bars do great job

will MG-s springs lower the car, or you recomend to buy some aftermarket set?

and because i am not from uk, and its dificult here to find any rover on junk yard, not to mention ZS180, do anyone of you knows where to find ZS180 shocks and bars, and for which amount of money

shipping to here is not the problem, my only problem is to find suspension

any information is priceless, thanks

[MC2 lowering questions]

Hi guys

I im in process of finding easiest an chipest solution for efficient dropping down. I could buy only set of springs, but my rear shocks are dead, and even if they arent, it is good to install some stiffer shocks.

Friend of mine is giving me as a gift brand new set of Civic EG6 skunk 2 shocks (http://store.skunk2.com/suspension-tuni ... ks-71.html) without springs and bump stops, so it would be best option for me to use them for aftermarket set, and to buy some Koni, Eibach.... set of springs designed for Aerodeck.

Are EG Civic rear shocks shorter than mine, and what would i get if i screw them on a car.

Which Honda shocks or coilovers i can mount on my car? Or MG ZS complete set if it fits

Please help, i cannot find and afford coilover set for my deck.

[4x114 to 4x100 conversion]

sorry mate, i dont understand you werry well. what are "spline problems"?

[4x114 to 4x100 conversion]

i have concidered spacers/adapters too, but i am afraid that it would be a problem to find wheel whith appropriate ET because of 1 or more cantimeters of wheel spacing. probably much easier than find set of nice 4x114's, but not as easy as picking up of first set that i like. allso i dont trust much the added spacer and bolts. sure, i will consider them again, but 4x100 hubs is much better option.

so, from which car i can fit hubs and from which proper sized F/R discs, and how hard is to take them of from donor car and fit them on my integra wagon

many thanks in advance

[4x114 to 4x100 conversion]

i have a big problem to find some nice 4x114,3 alloys so i thought to do 4x100 hub conversion

is it possible to do and which hubs and brake discs i can mount on my Aerodeck VTi?