Krzys
-
Posts
10,000 -
Joined
-
Last visited
-
Days Won
274
Content Type
Store
Calendar
Forums
Gallery
Downloads
Posts posted by Krzys
-
-
Bargain that! Do it!
-
Yeah should hold it! Or you can try double sided bonding tape?
-
Must still be fixing those cars!
-
cheers paul! the car looks a bit naked without the rear flaps tho
Make some!!
i might do im going to see how bad it is without the flaps atm
I used to keep watch in the mirror watching vast amounts of spray annoying folk behind me in heavy rain! Though to be fair, when it was like that I don't think the mudflaps helped that much
-
and also I don't if you guys can help me -
what do you call that oval metal at the back of the back seat that's holding the seat? cause my stock ones is to wide and it won't fit the vti seat hole at the back?
does it make sense? I'll take a picture tomorrow so y'all know what I mean hehe
You mean where the folding part of the rear seat would "clip" into/onto when it's in the upright position?
You'll need to swap it for one out of an MB6 I think
or an earlier reg car 99 and 2000 reg there was a change to the seats
came across this prob a few times with mates cars That's the one, couldn't quite remember when it changed and if it was just on the VTi or across the range!
![[smash.gif]](https://civic5.com/forum/uploads/smash.gif)
-
Like the projectors! Look awesome!
-
and also I don't if you guys can help me -
what do you call that oval metal at the back of the back seat that's holding the seat? cause my stock ones is to wide and it won't fit the vti seat hole at the back?
does it make sense? I'll take a picture tomorrow so y'all know what I mean hehe
You mean where the folding part of the rear seat would "clip" into/onto when it's in the upright position?
You'll need to swap it for one out of an MB6 I think
-
Yeah I bought all the proper bits to fit it as OEM! But it still sagged a little bit as they go along the bottom so the top didn't sit flush! But you can use adhesive tape or something to bond the lip to the bumper along the top if you wanted? As long as you can be sure you won't need to take it off!
-
68 views..... no replies hmmmmmm
Pehaps they are not talkers, or they are all to busy fixing their cars all the time
Wouldn't surprise me! Jap reliability in a Ford.....surely not!
-
Wow, engine bay looks awesome!
-
Ahhh mate she sounds beautiful!!!!
I have just had a small accident!
I bet you were soooooo tempted to just give her some hammer!?
-
Closest one to him is me and mine are an "All or nothing at all" shenanigan!
-
M3 engines are nice! So are M3's but it's just the compact, looks like it's had the boot cut off
i guess you meant M5 on one of them? lol
Well yeah the M5 goes without saying!
![[smitten.gif]](https://civic5.com/forum/uploads/smitten.gif)
-
I fitted four brand new Avon ZV5's to the standard wheels and they were really good in the dry and pretty decent in the wet!
-
M3 engines are nice! So are M3's but it's just the compact, looks like it's had the boot cut off
-
Like the 15's! Look much better I think! Will be lighter because they are smaller plus the extra acceleration is good!
VTi-S Splitter on the front, reminds me loads of my old MB6!! I had the same colour car and the PB VTi-s kit all round! Check out my old project thread in my sig!
-
I'd rather you buy the Rota's I've got
Id honestly love to mate,How much are you after again.
I've dropped them to £400 mate! Not a mark on them and tyres have loads of tread as they only saw 2 or 3000 miles!
-
Shouldn't be possible but if you damage the ignition barrel you should be able to do it
Are you really tall or do you just sit too close?
-
I'd rather you buy the Rota's I've got
-
Car looks clean! Another GLE!
-
Yeah I've done that one before! As well as tormenting and then just going to sleep, that works a treat!
-
Still better than nothing!
-
Wow, that cage is epic mate!!
I reckon gun metal grey would look awesome!
-
How did you get on with it?
Spyda's MB6 - SC before, now Turbo
in Honda Civic MA/MB/MC
Posted
The red look really good!