Jump to content

VTISpain

New Members
  • Posts

    43
  • Joined

  • Last visited

VTISpain's Achievements

Newbie

Newbie (1/2)

1

Reputation

  1. As soon as possible, I'm going to change my steering rack, and I want to change the tie rods too, but there's a problem with MB/MC tie rods, seems to be specific. OE Reference for Right is: 53540-ST3-E03 ; and OE Ref. for Left is: 53560-ST3-E03, and this Refs seems to be exclusive from MA/MB/MC. Somebody knows if EG/EJ/EK/DC... are compatible too? MA/MB/MC tie rod: Length: 180-181mm FM14x1,5mm & M9x1,25mm Cone: 13mm EG/EJ/EK/DC tie rod: Length: 180-217mm (Depends of manufacturer) FM14x1,5mm & M10x1,25mm Cone: 12,65mm-13mm (Depends of manufacturer) I want EG/EJ/EK/DC ones, because MOOG doesn't manufacture MB specific, and I like this brand.
  2. Looks nice, somebody knows if it will fit? Thanks!
  3. I can't find it! Could someone help me? No, Integra/EG and EK have different configuration, MB6's more like EK.
  4. What will fit? EG, EK, DC2... ? or... What should be the lenght and terminals? Thanks!
  5. Which are better? ITR pads: MB6 pads: MB6 have more braking surface, rest are the same.
  6. As I know, all EP (I get angry when I read EP3 or RSX such are special or exclusive calipers) have the same Rear Calipers. When we have ours sticked, could be a good replacement, piston is 1mm bigger!, but pads are bigger too. I know that the EP Right Caliper must be installed on the Left side and Left... ...but What more is needed? Lines?, Handbrake cable? Rotors?
  7. If /50, Federal's 595RSR are Good, Nice and Cheap
  8. The Air Filter is the same, so the box should be the same too
  9. I have an OmniPower CMC from EK waiting to be installed
  10. What's the improvement? Is the first time that I have heard about this
  11. What's the problem with Goodridge? Length? There are two references for MB6, one for Rear Drums (I don't know any MB6 with Rear Drums) and MB6 Rear Discs. I think that Goodridge = HEL, because I was going to buy Goodridge but a local dealer said me that they are having some problems with Stainless Steel terminals, so I went to eBay and seller said me the same with HEL.
  12. If you want the best, try Hardrace. I bought Moog (Federal Mogul's brand, Ferodo, etc) and they have good quality and price, but they are OEM replacement.
×
×
  • Create New...