JayTripleR
-
Posts
178 -
Joined
-
Last visited
-
Days Won
1
Content Type
Store
Calendar
Forums
Gallery
Downloads
Posts posted by JayTripleR
-
-
ye I know yours is mapped but would I have to do it to mine ????
and the polish job looks amazing
-
remember to do an ecu reset as well.
do you have to do a ecu reset after you fit an dizzy cap and rotor arm?
-
Ye I am getting the manecor red ones not because mine are failing but just to finish the look off in the engine bay ,and while am here can anybody recommend a red dizzy cap and rotor arm for mb6 before I troll the net and end up smashing the laptop lol
-
Dave I got that polishing kit for rocker cover and was going to do the manifold but the discs they supply are too big to get into the manifold I was wondering if you had any ideas mate
-
Welcome mate I like you are new to the site and I would just like to say you are in the right place
Great bunch of people here and won't find a more helpful lot ,good luck with the search
-
That's them done all but two that I can't find where they go as there are no hoses like these on the car
-
Quick update if you have the original hose clips on your car you will have to replace them with normal ones one the thinner pipes only
-
Lol I tried to upload a picture just now but says it's too large after I found the more reply option button
-
I am using my ipad sometimes then my laptop then my phone and I don't know how to move them from my phone to laptop or ipad
-
Lol lol if I could upload picture's I would be working for nasa 😂😂😂😂
It takes all my time and effort just to type lol lol
-
Just a wee heads up for you guys I had to cut the top radiator hose a little and the heater hose from the head to hot and cold valve near the bulk head ,was very easy with sharp knife and if you are using the original hose clips from the old hoses keep in mind the heavyset ones are a little bit thicker but they do fit
-
Got mine mate and have fitted three of them already lol
-
brilliant can't wait to get them
-
Hi chandler,any update on the hoses mate
-
Changing limiters in newer trucks is not easy to do and illegal ,probably only main dealer with computer could do it but everyone has a unique number that is traceable so if in an accident the police know exactly who done speed limiter
-
What about "w****r-el"
-
Chandler,are you going to order the hoses on the 1/6/15,if so how long roughly do you think before delivery, before the meet
-
I have a cousin who stays in crouchend ,I have been down a few times very nice to visit but not a fan of the underground don't even like Glasgow City Centre lol,but working in the trade I was told about the change a few months ago and to be honest have not noticed much difference on motorways but as you say on dual carriageway I see them driving up the back of cars
-
can you confirm its for a Bseries or Dseries please
It's a b series. Engine codeb18c4
-
I know what you mean about the noise Dave ,I drive under the erskine bridge to get home now ,there is a little bit of a tunnel and can't help myself putting ruby into second gear and giving her the beans ,always brings a big smile to my face she,has quite the rip on her now after the manifold got done ,can't wait for the meet ,haven't drove her for two weeks now because am doing other cars at the moment ,you don't realise you miss her like crazy until you don't get to drive her
-
1
-
-
Am very interested in the red ones but how do you get them to me ? If I buy them
-
I looked up dark ice designs , they don't do any wind deflectors in there product list
-
What is dark ice designs?
you could also look at dark ice designs for the wind deflectors, they make stuff for MG's and Rovers, last time i looked the deflectors for the ZS were very resonably priced
-
It was 220 bhp plus the stainless exhaust and cone fitted couldn't get it mapped was already maxed out , and I was driving to work one quite morning when I sank my foot down and it jammed on full throttle nearly crapped myself as I was approaching a roundabout at that moment and I don't blame Ali I blame the wife lol
Burbleboy's VTi-S Build **NOW SOLD 16/12/15**
in Honda Civic MA/MB/MC
Posted
have too nip out to garage just now to check on my strut brace see if its dry now
back in a mo