JayTripleR
-
Posts
178 -
Joined
-
Last visited
-
Days Won
1
Content Type
Store
Calendar
Forums
Gallery
Downloads
Everything posted by JayTripleR
-
Yeah and rag dolled lol
-
Double check the bolts you have fitted already as i made that mistake when i did my steering rack and put a longer bolt in the wrong place
-
I cant see how reducing the gap would change the emissions or give better performance on track i think all that it would do is increase your emissions if anything as it would change the way it butns the fuel / air mixture and cause spark plug to fail prematurely,probably better investing in better spark plugs
-
-
I've done two track sessions previously, I haven't been killed yet but some professional knowledge and help won't hurt Eh if you ever go to knockhill don't mention burbleboy or they will drag you off in cuffs
-
No need to apologise dude,there were a few people telling me the same thing so I would have done it anyway and the good thing I can take away is I have learned a little bit more about my car which is always good ,and shared it with others
-
I didn't go well,the rack looks the same but has slight differences like the gators and the shape of the track rod ends,the power steering pipes are different and the subframe is different so to do job the complete subframe and everything that goes with it needs changed So just going to get my rack refurbished and refit
-
Well started removing steering rack this morning have got a complete type r integra subframe with rack and anti roll bar assembly hopefully will do complete change over
-
Don't think different spark plugs would be a huge difference unless it's the wrong length of plug in it,I would check the distributor cap and rotor arm and clean or replace them depending on what you find which is a quick and easy check double check your plugs are correct ones
-
thanks guys am going with the type r dc2 rack and hope it all goes well
-
I know this might be a daft question but I have to ask ,I recently took one of my front fog lights out because it wasn't working ,I noticed I couldn't get into the bulb to replace it,is there a replaceable bulb or is it a new lamp I need
-
I have a machine mart catalogue in work I will give it a look and see what they have cheers mate Ps the rocker cover came up a treat
-
If you can get a battery gun (I used a snap on one which worked a treat ) for the 32mm hub nut if not use a long bar and shock it with a hammer or put a tube on the end of your bar,manifold nuts I would use a single hexagon sockets and apply some heat then hammer socket on to rounded nut that should get it off ,and the engine mount bolts am afraid just brute force for them ,good luck
-
Also check alternator pulley while you have belt off and check it turns freely
-
Both of your problems could be related get your other fault looked at first
-
To be honest it is very hard to make that out it sounds maybe something like an exhaust blow can you re record it any better?
-
Hi , it sounds like your aircon pump is siezed or about to remove your belt on it and see if it spins ok ,when the pump puts too much load on then the revs will struggle
-
Ye I didn't bother doing the ones on the bulk head didn't see the point very awkward to get at
-
If I wanted to improve the steering rack say for the track is there any companies out there that do it for my mb6?
-
Ye no worries ,also the small elbow pipe from back of head the hose clip needed changed ,what I did is just buy an assorted pack of hose clips which covered me was only a couple of quid for them ,and no I haven't found out where the last two hoses go yet mate
-
Oh you got the black ones didn't you ,I take it they are gloss and not Matt And a big up for getting the hoses
-
Ye I also got home and found a missed you parcel card on the floor ,but he had written on it "left in house" took me about 20 frantic mins to work out he meant the play house round the back garden
-
And is that the inlet manifold I spy in the corner
-
Holy fairy cakes!!!! It looks like you have had every nut,bolt,screw and washer off it at some point,am loving the chassis paint looks awesome
