Viltor

I noticed also that my dot4 its a dark, does it can be the cause ? thanks

Ok, I will do it, I think it never been replaced, because on the manual I saw only hr-v & s2000 need to replace the transmission fluid. strange

Well, i noticed it does when it cold and warm. I dont know what was the last time that the MTF was changed, it doesnt says on manual PS: I think it only does while the car is turned on and running, not in neutral.

Hello everyone, 2 or 3 months ago, I noticed when Im shifting from 1st to 2nd and 2nd to 3rd I notice sometimes some friction. is that normal ? Most of the time its 1st to 2nd and it happens mostyle at low rpm, like 1500rpm or 2000 rpm, is that normal ? someone noticed that ? Thanks

Some pics of the engine bay Hope you like it

Good Morning everyone, Here is some parts that arrived these days: 2x blue prints front brake disks 2x rear brake disks, 1x fuel filter 1x cabine filter 2x rear droplinks 1x front pads 1x rear pads 1x skunk2 oil cap 1x skunk2 battery tie down 3x Skunk2 fend washers Still waiting for my skunk2 tank covers. I will post soon some pictures of the engine bay to show the new stuff. Thanks

Hello everyone, I have a question, my MB6 has his stock header with a straight exhaust pipe of 60mm external diameter. Im thinking in replacing my header to a Tri Y header 4-2-1 wich has 2.5 ~63.5 external diameter. Do i need to do any modification in the flanges ? Can anyone give me some advices ? thanks

Hi everyone, Yesterday I noticed some weird noise at low speed on a bumpy road. I went to the front and I noticed my oil dipstick tube as rotated like 35degrees to the left and the dipstick is hitting the exhaust manifold. Its the first time I saw something like this. What could I do to fix it ? I just want that the dipstick tube is aligned in the center and not touching the exhaust manifold. Thanks

Here's my engine with skunk2 sparks cover hope you like it. My b18c4 is leaking as you can see on the corn of the head gasket. 2 months ago I replaced the distributor o-ring, going to see if its the vtec solenoid that is leaking to fix it. Thanks

Hello Everyone, some goodies that arrived there days And the valve cover. Just ordered also: 2x blue print front disks with blueprint pads 2x blue print rear disks with blue print pads 1x blue print fuel filter 1x blue print cabine filter 2x read drop links. Later I will post a picture of my engine bay with Battery Tie, valve cover and Sparks cover on. Thanks

Just arrived 5min ago my kayaba Excel-G shocks. I will use them with the stock springs, are they better than OEM ? Any1 using them ? Thanks 2x rear shocks and 2x front shocks

Hello Everyone, Here are some updates of my MB6. -> SPOON Reservoir covers (Its temporary it will be replaced by Skunk2) -> D1 Spec blue Lug nuts( Its temporary it will be replaced by Skunk2) Next Upgrades -> Skunk 2 valve cover -> skunk 2 vtec solenoid cover -> skunk 2 shift knob -> skunk 2 battery tie -> skunk 2 oil cap -> skunk 2 wash fenders -> kayaba Excel-G shocks Stay tuned!

Hello everyone, Wanted to do a full replacement bushing kit on my Civic MB6. I saw on ebay few kits from energy suspension, powerflex hyper flex. My question is doest the EG ones or EK fit my MB6 ? Wich brand should I choose ? anyone has some feedback ? Thanks

Hello everyone, My civic MB6 has already a K&N panel filter an 60mm external mid pipe, but the exhaust stills the stock one. Here in Portugal most of people has Magnaflow exhaust and only few has Vibrant. Basicly they have the same look, only the Vibrant is black. I want an exhaust that doesnt sound louder, between Vibrant and Magnaflow what would you recommend ? Thanks

Good morning everyone, One question, my B18c4 has OEM spark and plugs, I see most of people use 10.2mm plugs with Iridium plugs. I read it saves u some fuel, and it increase your performance. Should i Get this combo ? 10.2mm cables and Iridium parks ? Or just stick with OEM sparks and plugs ? When Im low in fuel if I stop the car, the next day its difficult to start the car, so I think its time to replace the sparks. Thanks

Hi everyone, My car has the stock headers, and a 60mm external exhaust pipe, the internal diameter its 2.25" if im not wrong. My question is I found this cheap headers 4-2-1 with a outlet 2" (50mm) http://www.ebay.co.uk/itm/Exhaust-manifold-header-Honda-Civic-DEL-SOL-B16A-B16A2-B18C-B18C4-B18C6-VTI-/281756763667?pt=LH_DefaultDomain_3&hash=item419a030613 Would be this a nice upgrade ? Would I noticed the difference between stock headers with this one ? Or should i go for 2.5" instead ? My engine is stock, Im just running a K&N Filter, just wanted the car breathe a bit better. Thanks

Hi everyone, time to do some upgrades. I need to change my engine oil, I bought Shell Helix 5w40 and I went to Honda to buy the OEM filter. I also replaced my OEM filter for K&N one, just to the engine breathe better. Any opinions about the oil ? In portugal most of Hondas use Shell helix 10w40, only few people use 5w40, since my car in Honda always had 5w40 thats why I bought a 5w40 from Shell. Another question, Im thinking in replace my sparks soon, wich one should I get ? I hear that iridium are very nice. Should I try to get a 10.2mm NGJ spark plugs also ? Thanks

Hello everyone, I have a question. I noticed when i accelerate and decelerate there is some space/play but there is not sound. I inspeced my lower control arm iI noticed that the bushing on the right side https://www.google.pt/search?q=lower+control+arm+bushing+civic&espv=2&biw=1280&bih=604&source=lnms&tbm=isch&sa=X&ved=0CAYQ_AUoAWoVChMI9uO9_p_dxgIVRFYUCh2oEgjw#imgrc=qgU5u_IxiN_oUM%3A It look likes that bushing has shrank. Is that normal ? I also thinking in replacing and my frond bushing with enery or powerflex bushing kit. The EG/EK fit in mb6 ? Thanks

Here in Portugal most of the MB6 I saw are from 97 or 98 in gray or in Pirates Black. I never seen one from 2000 in blue. Mine is from 2000/07 I think its the end of production of that Series. Maybe I have the lastest VTi in Portugal

Hi everyone, My name is Vitor and Im from Portugal. I didnt post any pictures of my car yet, so thats the car I bought 2 months ago. The car is revisioned by Honda until 181.000 KM Its fully stock, I hope you liked it.

Hi everyone, Have a question. My civic Mb6 when Im driving on a bumpy road theres like a clunk noise like this in this video , and I feel like something is hitting in the chassis near my right feet. I inspected the drop links and they look tight, I also inspected the anti roll bar bushing and they look like ok. What do you think ? Thanks

Hi guys. I have news, yesterday I washed my car, and I noticed that the leaks were from another place. The real leak is where is the green circle Is that reparable ? or do I need to buy a new rack ? Thanks

Hi noodels, I will try tomorrow to Tight the pipes up, but the mechanic guy said the pipes cant be thighten more, plus he didnt even try. the pipes seems to be ok. If I cant tight the pipes up should silicon fix the problem ? Thanks

Hi KiNK43 thanks for help, anyway i was inspecting it, I cleaned it and I found that the leak is from the first red ring or both on the power steering rack. Would you think do I really need to buy a new one or there is something that I can do to fix it ? Thanks