johngreen537 Posted February 28, 2011 Share Posted February 28, 2011 lol Paul, more mission controls for you? Syeder, why not fill in the hole where you stretched them to put in the VCON, fill the gaps between the blanking plates (I'd prolly use silicone as its cool for stuff like that) then wrap the heater surrounds.Will add a cool finish to it Link to comment Share on other sites More sharing options...
knight Posted February 28, 2011 Share Posted February 28, 2011 I like that VCON mate!!! You just turn the knob to put it hi-low?? Link to comment Share on other sites More sharing options...
johngreen537 Posted February 28, 2011 Share Posted February 28, 2011 You do mate, but they cheaper on funkyproduct.com than on ebay http://www.funkypower.co.uk/catalogue.php?make=HONDA&model=CIVIC&year=1992-95+CIVIC&level1=ELECTRONICS&level2=VTEC-MIVEC-VVTI+CONTROLLERS&level3=&id_product=4350 Link to comment Share on other sites More sharing options...
syder Posted February 28, 2011 Author Share Posted February 28, 2011 HAPPY BIRTHDAY 35 TODAYcheers mate You do mate, but they cheaper on funkyproduct.com than on ebay http://www.funkypower.co.uk/catalogue.php?make=HONDA&model=CIVIC&year=1992-95+CIVIC&level1=ELECTRONICS&level2=VTEC-MIVEC-VVTI+CONTROLLERS&level3=&id_product=4350I payed £47.00 for v-tec con off unit8 performance , just before the vat increase Nice mate!!! I've been wanting some plasma dials for a while can you do a night time shot? with all the different colours you can choose! ;) I would mate but no engine back in the car as yet , so no power , but when all and running i will put some up for you lol Paul, more mission controls for you? Syeder, why not fill in the hole where you stretched them to put in the VCON, fill the gaps between the blanking plates (I'd prolly use silicone as its cool for stuff like that) then wrap the heater surrounds.Will add a cool finish to it good shout but i is lazy Link to comment Share on other sites More sharing options...
vtivtec170 Posted February 28, 2011 Share Posted February 28, 2011 is that vtec controller as easy as that, turn it up or down to raise or lower the vtec point? Link to comment Share on other sites More sharing options...
syder Posted February 28, 2011 Author Share Posted February 28, 2011 is that vtec controller as easy as that, turn it up or down to raise or lower the vtec point?To a degree , you have to hold the rev's for a time to where you want the v-tec to kick in , set the v-con on the controller to point of where you are revving it , then the controller will flash when set , so then that's when your v-tec will kick in that point you set while holding the revs , so if you hold the revs at 5800 and set the v-con to the same point that's the point of v-tec kick in , the dial is 1000rpm per notch , there are four wires to place into your ecu Link to comment Share on other sites More sharing options...
vtivtec170 Posted February 28, 2011 Share Posted February 28, 2011 is that vtec controller as easy as that, turn it up or down to raise or lower the vtec point?To a degree , you have to hold the rev's for a time to where you want the v-tec to kick in , set the v-con on the controller to point of where you are revving it , then the controller will flash when set , so then that's when your v-tec will kick in that point you set while holding the revs , so if you hold the revs at 5800 and set the v-con to the same point that's the point of v-tec kick in , the dial is 1000rpm per notch , there are four wires to place into your ecucould you set up the same controller for the IAB's, surely the IAB is just a single wire out of the ecu like the vtec, is it?then have the vtec and IAB controlled to where you want? with 2 seperate controllers? Link to comment Share on other sites More sharing options...
knight Posted March 1, 2011 Share Posted March 1, 2011 lol Paul, more mission controls for you? OOO'yes!!!! Link to comment Share on other sites More sharing options...
knight Posted March 1, 2011 Share Posted March 1, 2011 HAPPY BIRTHDAY 35 TODAYNice mate!!! I've been wanting some plasma dials for a while can you do a night time shot? with all the different colours you can choose! ;) I would mate but no engine back in the car as yet , so no power , but when all and running i will put some up for you No worrys mate! Link to comment Share on other sites More sharing options...
syder Posted March 1, 2011 Author Share Posted March 1, 2011 don't know , maybe possible Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.