IceMan Posted July 4, 2009 Share Posted July 4, 2009 What PSI should I pump my tyres to? They are on standard VTi Alloys , brigestone potenza's. I looked at the door sticker but its in Kph and has the symbol ~160kph and 160~kph , I dont know which one means greater than and less than Link to comment Share on other sites More sharing options...
G Unit Posted July 4, 2009 Share Posted July 4, 2009 cant remember exactly but i use 26psi in front and 28 in rears Link to comment Share on other sites More sharing options...
civicturbo79 Posted July 4, 2009 Share Posted July 4, 2009 i used 30 psi all round Link to comment Share on other sites More sharing options...
blacksport01 Posted July 4, 2009 Share Posted July 4, 2009 If im right it is either 30psi all round or 32psi at the front and 30psi at the rear. 30 all round rings a bell Link to comment Share on other sites More sharing options...
IceMan Posted July 4, 2009 Author Share Posted July 4, 2009 I have been running them on 30 psi each but they look squishy. I should check them again. Link to comment Share on other sites More sharing options...
1.8vti Posted July 5, 2009 Share Posted July 5, 2009 i used 32F 30R on before but it just worn on the side. and i used 39F 38R it feel much better Link to comment Share on other sites More sharing options...
Dave Posted July 5, 2009 Share Posted July 5, 2009 32psi front is right (least thats what im using) depends on load (as in weight) so..........stooo yours should be about 10psi lmao Link to comment Share on other sites More sharing options...
jalesi2001 Posted July 5, 2009 Share Posted July 5, 2009 Its 32 front, 30 rear with standard alloys!! Link to comment Share on other sites More sharing options...
stoocake Posted July 6, 2009 Share Posted July 6, 2009 I must admit I was running at 35psi all-round for the sake of fuel-efficiency.I run around 28psi now on the road, 25psi cold for track.The official specs are 32F and 30R - but the sticker in the drivers door suggests something else for running about 160km/h think it's 34F and 32R Link to comment Share on other sites More sharing options...
IceMan Posted July 7, 2009 Author Share Posted July 7, 2009 http://cars.homenetcs.co.uk/honda-civic-mb6/chassis.htmThanks Dave Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.