noodels Posted January 16, 2011 Share Posted January 16, 2011 another method is the string method tie a piece of string all the way round the vehicle hub height to see parallel faults how it used to be done!!if you could keep the horse still for long enough!!! Link to comment Share on other sites More sharing options...
gypatch Posted February 5, 2011 Share Posted February 5, 2011 Sounds like your tracking mate. Unless you've lowered it, then it'd be negative camber!Go get it laser allinged, that checks every nook and cranny of suspention And you get a pretty cool print off usually too i got a laser alignment done after hitting a pot hole it showed my offside front wheel is 2.2mm infront of the nearside not a clue which part to change lol but thats how fine they read things Link to comment Share on other sites More sharing options...
scottravenhill Posted February 7, 2011 Author Share Posted February 7, 2011 I took it 2 a 4 wheel alignment place and he said its been in an accident, there's nothing I can do, it needs to be jigged. surely it can't be that bad? Maybe it won't be perfect but surely it can be improved? Link to comment Share on other sites More sharing options...
civicturbo79 Posted February 7, 2011 Share Posted February 7, 2011 Did he give you a print out , or say what was damaged , if its just the suspension damaged that can be changed if its the suspension mounting points on the body that a damaged and it would have to have be one big crash to do that , Rich. Link to comment Share on other sites More sharing options...
scottravenhill Posted February 18, 2011 Author Share Posted February 18, 2011 Sorry rich didn't see you're reply. Nah he didn't give me nothing. From what I got out of him it sounded like he got it on the ramp and didn't do anything with it. I know its been in a crash but I've seen the car loads of times and its not that bad underneath in my opinion. I don't seem to have much luck with this car so far! Link to comment Share on other sites More sharing options...
noodels Posted February 18, 2011 Share Posted February 18, 2011 take it to place with hunter lazer and get print out now?cts tyres?done mine Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.