scottravenhill Posted May 23, 2011 Share Posted May 23, 2011 i guess not, but i bet you woulda fixed it if given the chance! you do come accross as 'the man who can' Link to comment Share on other sites More sharing options...
johngreen537 Posted May 23, 2011 Share Posted May 23, 2011 Certainly would have I don't give up, or say 'no' easily Sometimes it pays off, sometimes costs me more in the end, but fun getting there Link to comment Share on other sites More sharing options...
HONDACIVIC Posted May 23, 2011 Author Share Posted May 23, 2011 so woud that tool wrk then Link to comment Share on other sites More sharing options...
scottravenhill Posted May 23, 2011 Share Posted May 23, 2011 Sounds like a no no but if u read down it says get a dc2 rack Link to comment Share on other sites More sharing options...
HONDACIVIC Posted May 23, 2011 Author Share Posted May 23, 2011 wouldnt the dc2 rack be the same Link to comment Share on other sites More sharing options...
johngreen537 Posted May 24, 2011 Share Posted May 24, 2011 DC2 rack is the same, but, generally DC2's cover a LOT less miles than M's so are usually in much better condition and tighter. Link to comment Share on other sites More sharing options...
noodels Posted May 24, 2011 Share Posted May 24, 2011 had print out on Hunter alignment gauge and went from there sometweeking later great, used to tramline and follow camber on road BAD over 69mph ??dont realize at speeds the pressure you are putting on wheel or let go!!!and see where it wants to go !! not nice over 69.9mph ??The free test was the best money i havnt spent.. Link to comment Share on other sites More sharing options...
scottravenhill Posted May 24, 2011 Share Posted May 24, 2011 I wonder if its worth contacting j and r cv joints as they are cheap and reliable for brand new stuff and they are in conjunction with a pump n rack specialist Link to comment Share on other sites More sharing options...
jasons Posted May 28, 2011 Share Posted May 28, 2011 how do the 17s feel like when you go round cornors mate and what can i do to improve the steering rack like all mb6 owners will knw that it is a nightmare drivnng on motorways at 80mph + the steering feels realli loosewhat is the issue with the rack?(I ask because I don't know - I do know that a zs will run 18's and there are no issues at all, although the 180 rack is a quicker rack than the others - is this rack not a worthwhile upgrade?) Link to comment Share on other sites More sharing options...
wezza9 Posted May 29, 2011 Share Posted May 29, 2011 i think some one found out they are different the same as the front arb is and will not fit cause the V6 engine i think or was it the dc2 front arb is no good mgzs is good handling set up not too harsh i have jamex springs too tad low on some speed bumps on 15" but back on 16"'s now Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.