Dexter Posted June 15, 2011 Share Posted June 15, 2011 Does anyone have a front camber kit on their MC2 or know where to get one? I've tried searching but haven't found an satisfying answer yet.I bought a DC2 Buddy Club kit off ebay (which i heard is a direct fit on MB6) and got a disappointing call from my mechanic today: he said the mounting points or something like that on the kit were 8mm too narrow. He said he could do a custom installation and make it fit but it would most probably ruin the caster. So i said forget it, and now i'm searching for another kit. Any ideas? TSS Tuning has a kit for sale, which strangely fits both the MB6 and MC2. So what's up with that? A Buddy Club DC2 fits the MB6 but not a MC2, and then there's the TSS kit that fits the MB6 and MC2 but not the DC2. I'm really confused now. Sorry about repeating myself in several topics but i need replacement parts, quick! Link to comment Share on other sites More sharing options...
jasons Posted June 15, 2011 Share Posted June 15, 2011 don't know if this helps, but the integra dca arms are wider than dc2 arms. japspeed uk have stock of dca arms. Link to comment Share on other sites More sharing options...
Errordeck Posted July 8, 2011 Share Posted July 8, 2011 As far as I know, the MB has complete EG suspension, so any UCA from an EG of DC would fit. The camber you have changes when you use EK stuff. Link to comment Share on other sites More sharing options...
Didjeridave Posted July 8, 2011 Share Posted July 8, 2011 The MB6 should certainly be the same as the MC2, is there a chance they sent the wrong part?! Anyway, there's a front camber kit that replaces just the bushings, not the whole arm:http://cgi.ebay.co.uk/88-00-Honda-Civic ... 20bad8c93e Not heard any reviews of it though! There was a post about them on here a while back. Link to comment Share on other sites More sharing options...
Dexter Posted July 9, 2011 Author Share Posted July 9, 2011 The MB6 should certainly be the same as the MC2, is there a chance they sent the wrong part?!Perhaps. Maybe i should e-mail them with the manufacturing number and ask them to check it. When i ordered it they couldn't guarantee it would fit a mc2, so i can't return it and get refund since there's also marks on it from the failed installation. But if it turns out they sent me the wrong part, well that'd be a whole different story.But when comparing my bits to the ones shown here http://www.civic5.com/forum/viewtopic.php?f=29&t=352, they look identical to me so i'm baffled. Link to comment Share on other sites More sharing options...
jasons Posted July 9, 2011 Share Posted July 9, 2011 But when comparing my bits to the ones shown here http://www.civic5.com/forum/viewtopic.php?f=29&t=352, they look identical to me so i'm baffled. I have DC2 arms and was initial sent DCA arms which are wider than DC2.The DCA arms look identical other than they are too wide for ZS/DC2 which is the same as the old EG, don't know much about MB stuff, but thought there was some difference between DC2/EG/ZS?Hope that helps - the DCA was wider but looked same. Link to comment Share on other sites More sharing options...
prezes Posted July 17, 2011 Share Posted July 17, 2011 did you manage to sort it? Let us know Link to comment Share on other sites More sharing options...
Dexter Posted July 22, 2011 Author Share Posted July 22, 2011 did you manage to sort it? Let us know I gave in and bought the TSS Tuning kit. They were orange, hella ugly... but if it would've bothered me too much, i always could've painted them which i didn't . They're being fitted actually right now. I'll go pick up the car later today, curious to see how well it deals with my messed up camber. Link to comment Share on other sites More sharing options...
prezes Posted July 22, 2011 Share Posted July 22, 2011 How is it then??! Also can I ask you for a link to where you got it from please ? Link to comment Share on other sites More sharing options...
Dexter Posted July 23, 2011 Author Share Posted July 23, 2011 How is it then??! Also can I ask you for a link to where you got it from please ?Well... didn't fit, they sent me the wrong one! Just take a look at the picture and you can see that they're totally different:They looked a bit weird when i opened the box, compared to the buddy clubs i tried also but since i didn't know what the original arms even looked like i wasn't alarmed. Just got a e-mail from the company and they want to exchange the kit for arms meant for a 92-96 Civic/CRX/Integra, which was exactly the fitment on the Buddy Club kit that DID NOT fit my deck. Here's the link for TSS Tuning: http://www.tss-tuning.de. It's all in german, and it's not the cheapest company, but they've got a lot of stuff for decks. Take a look at their bodykits... .But camber kit wise i'm waiting for a reply from TSS to see what's up with this weirdness! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.