big_skyz Posted July 8, 2011 Share Posted July 8, 2011 hi, i need a hand please, im looking to buy these but i dont know if they will fit, i have the mb3, im not too sure on the pcd of these alloys but she told me from stud to stud are 4inches apart.http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... TQ:GB:1123Will these fit do you think, cheers guys. Link to comment Share on other sites More sharing options...
Dave Posted July 9, 2011 Share Posted July 9, 2011 Here's the info you need to find out mate >> http://www.civic5.com/wheel-info.html Your pcd is 4x100 and the et is 45. This info is mostly stamped on the alloys somewhere on the back, so get her to check TBH, they look pretty buggered mate. looks like they've used the kerbs as brakes! Link to comment Share on other sites More sharing options...
big_skyz Posted July 9, 2011 Author Share Posted July 9, 2011 i did notice they were battered but will keep looking i think, i either want black or white. i just need something cheep for now so in not rolling on trims, lolalso 4x100 14" and 15" ( ET 45 ) is there any diff on 16" or 17" wheels? what happens if the offset is greate or smaller, i know i sound like a n00b but its always good to learn Link to comment Share on other sites More sharing options...
ryan.. Posted July 9, 2011 Share Posted July 9, 2011 et and pcd will stay the same. If you use a different offset it will mean the wheels may stick out the arches and not really fit properly Link to comment Share on other sites More sharing options...
big_skyz Posted July 9, 2011 Author Share Posted July 9, 2011 ah, cheers bro, any recomendations what to get?cheers Link to comment Share on other sites More sharing options...
Didjeridave Posted July 9, 2011 Share Posted July 9, 2011 Check out 'Carl Salter wheel fitments' http://www.carlsalter.com/wheel_fitments.html to cross-ref wheel fitments from other makes (although the offset for our MBs is incorrect)! You'll find you have a pretty big choice for an MB3. Renault clio is et35-38, so those wheels should fit fine but will sit 10mm out from where the stock wheel would be; 10mm is about the recommended limit for changes to offset. You also need to check that the centre bore is not smaller than 64mm.I personally go for Team Dynamics stuff because of the build quality; there's a lot of cheap Chinese rubbish out there made from alloys weakened by being bulked out with scrap metal! On these roads & especially with low profile tyres they can crack & buckle. Massively down to preference tho. Link to comment Share on other sites More sharing options...
chris86 Posted July 9, 2011 Share Posted July 9, 2011 renault clio are 4x100 you would just need sutable spiggot rings. the wheels i wouldnt bother with due to damage. far better wheels for similar price out there Link to comment Share on other sites More sharing options...
jonnyricer Posted July 9, 2011 Share Posted July 9, 2011 Those wheels look pants any way find some thing better!! Just my 2p s worth Link to comment Share on other sites More sharing options...
big_skyz Posted July 10, 2011 Author Share Posted July 10, 2011 cheers guys, thats helped me quite a bit, i have left them, just need a cheap pair, bills have been a pain this month, when you paid em off theres always sumunt else that bite you in the a*s, lol Link to comment Share on other sites More sharing options...
big_skyz Posted July 10, 2011 Author Share Posted July 10, 2011 cheers guys, thats helped me quite a bit, i have left them, just need a cheap pair, bills have been a pain this month, when you paid em off theres always sumunt else that bite you in the small bottom, loli didnt say small bottam haha Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.