Jump to content

which coilovers fit MB??


jarvis483

Recommended Posts

Hello all, i am new to the forum and dont have an MB yet.....

I used to have an EJ9 but now im considering a 1.4 5door mb instead of my 106 quicksilver. However after reading through alot of posts in this suspension section. i was wondering if anybody could give me some clarity.

What coilovers can be used on the civic MB and if any, what modifications are needed to make them fit?

Thanks guys,

Maritn

Link to comment
Share on other sites

Loads, with or without modifications! Some choices do require different lower control arms, but that's not much of an issue. There's a good number out there specifically for the MBs. Depends what you have in mind price wise?

Link to comment
Share on other sites

  • 1 month later...

thought i wouldpost this in here as it seems relevant.. i found these.. need to know will these fit an MB6, is so will i be able to use eg/dc2 lca's and tegiwa rear tie bar with this?. looking at doing my whole suspension in the next month.. and looking at kits.. i love the colour of this and seen d2 on other cars... just wanted to know if this is the right one for an MB

http://www.ebay.co.uk/itm/D2-RACING-COILOVER-KIT-CIVIC-EG-DC2-92-95-FORK-Z0093-/260900802915?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3cbee65163

Link to comment
Share on other sites

says fork for 95 eg may think refers to rear ? and uses spacers ect so oem MB lca used :| best ring them ;)

ps look in the traders section meister R do them for mb6 same £s with discount i think :idea:

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...