harVTEC Posted January 16, 2012 Share Posted January 16, 2012 Alright everyone,I'm taking my engine out next month to do the clutch, I thought I may as well take it out and give the engine bay a clean etc.I plan on doing a complete service while it's out including headgasket and cam belt.Basically I have a list of everything I needed and have got, could people tell me what else I may need please? OILOIL FILTERCLUTCH KITFUEL FILTERPOLLEN FILTERAIR FILTERGEARBOX OILTIMING BELTFULL GASKET KITCOOLANTBefore I start I want to have everyhting, I am using OEM parts only.Thanks in advance for any help harVTEC Quote Link to comment Share on other sites More sharing options...
noodels Posted January 16, 2012 Share Posted January 16, 2012 drive shaft oil seals,water pump, cambelt tensioner, gear selector seal oh undo the crankshaft pully bolt b4 removal of engine Quote Link to comment Share on other sites More sharing options...
harVTEC Posted January 17, 2012 Author Share Posted January 17, 2012 drive shaft oil seals,water pump, cambelt tensioner, gear selector seal oh undo the crankshaft pully bolt b4 removal of engine Hi,Thank you I have just got a water pump, however I'm not sure what part is the drive shaft oil seal. If you get a minute could you tell me what part it is on this diagram http://www.hondaoriginalparts.com/honda_car_parts_selection_pfk.php?block_01=17ST311&block_02=B__2100&block_03=17466Also where would I get the gear selector seal? Is it a gearbox part?Thanks for your help.harVTEC Quote Link to comment Share on other sites More sharing options...
harVTEC Posted January 17, 2012 Author Share Posted January 17, 2012 Is the drive shaft oil seal (1 of them) number 15 in this picture http://www.hondaoriginalparts.com/honda_car_parts_selection_pfk.php?block_01=17ST311&block_02=M__0200&block_03=17466Thanks.harVTEC Quote Link to comment Share on other sites More sharing options...
noodels Posted January 17, 2012 Share Posted January 17, 2012 1"£££$££"!! no.15 not sure were to find other seal at mo i have computer problems holding wires together with fingers Quote Link to comment Share on other sites More sharing options...
harVTEC Posted January 24, 2012 Author Share Posted January 24, 2012 Anyone else able to help with this? Thanks.harVTEC Quote Link to comment Share on other sites More sharing options...
david974 Posted January 25, 2012 Share Posted January 25, 2012 n21 AND n2 For gear selectorhttp://www.hondaoriginalparts.com/honda ... k_03=17466N 6 for the other drive shaft sealhttp://www.hondaoriginalparts.com/honda ... k_03=17466 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.