swampdonkey Posted May 9, 2012 Share Posted May 9, 2012 Hi people,I've read a different threads on this topic but its just confused me even more I've found 2 sets of used alloys i like for my mb6 but i am pretty much clueless with off sets and width limits.Both sets are 4x114.3, 7x17" ET42. I've got standard suspension at the mo but i will be upgrading to mgzs suspension at some point soon. My brother in law has a zs180 and its on 17's as standand, so I guess 17's on the mb should be fine. Would that be a good guess???? I would love a set of these, http://www.wolfrace.co.uk/asia_tec_deta ... wheelID=87, but i can't find them with 4x114.3 Thank you. Quote Link to comment Share on other sites More sharing options...
Krzys Posted May 9, 2012 Share Posted May 9, 2012 I should think they will be fine mate! If you go much lower you might have to roll the arches! Quote Link to comment Share on other sites More sharing options...
crazycustomz Posted May 9, 2012 Share Posted May 9, 2012 ive been having the same issue 4x114 can be a pain at times Quote Link to comment Share on other sites More sharing options...
swampdonkey Posted May 9, 2012 Author Share Posted May 9, 2012 Thanks Krzys.I know what you mean about the 4x114.Searching for galant wheels on ebay bought up a much bigger selection for 4x114 though. I'm really torn between 16" or 17". If i've worked it out right for 17" i'd need 205 40 17, with a small wall size i can see the ride being a bit nasty on bumpy roads. Are the looks worth the ride comfort..............possibly Quote Link to comment Share on other sites More sharing options...
Nairnster Posted May 9, 2012 Share Posted May 9, 2012 You also need to make sure the centre bore of the alloys is correct too, or larger (as you can use spigot rings to help them fit)More to it than just PCD and Offset. Quote Link to comment Share on other sites More sharing options...
crazycustomz Posted May 9, 2012 Share Posted May 9, 2012 16s is a nice look in my opinion but harder to find Quote Link to comment Share on other sites More sharing options...
crazycustomz Posted May 9, 2012 Share Posted May 9, 2012 look like jordans Quote Link to comment Share on other sites More sharing options...
swampdonkey Posted May 14, 2012 Author Share Posted May 14, 2012 You also need to make sure the centre bore of the alloys is correct too, or larger (as you can use spigot rings to help them fit)More to it than just PCD and Offset.what size is the centre bore on the standard wheels?Thanks Quote Link to comment Share on other sites More sharing options...
fyfie5 Posted May 14, 2012 Share Posted May 14, 2012 some one correct me if im wrong but i think its 56.1mm?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.