remote fob problem/programing

[RenatoNismo]

had to order universal central locking with remotes for 9$, provided with good feedbacks. thanks anyway

[Dave]

To replace the original key fob you would need the matching receiver dome, module In dash and the fob. All three must be matching

[dr.slimm]

  On 5/31/2016 at 4:13 PM, Dave said:

To replace the original key fob you would need the matching receiver dome, module In dash and the fob. All three must be matching

Expand  

 

Ceiling unit is interchangeable, same part number for Vti/non-Vti, tested on my car. There is just receiver with quad-schmitt trigger, nothing else.

[Dave]

  On 5/31/2016 at 6:59 PM, dr.slimm said:

 

Ceiling unit is interchangeable, same part number for Vti/non-Vti, tested on my car. There is just receiver with quad-schmitt trigger, nothing else.

Expand  

I tried changing the sensor in the ceiling when I had my 1.4 civic and it didn't work. I used the sensor from my aerodeck  to try it. My 1.4 fob wouldn't work with it. However when I used the fob from the aerodeck with the sensor from the deck still fitted to my 1.4 it opened and locked the doors no problem.  So the sensor/receiver have to match. 

[dr.slimm]

I have changed ceiling unit in MB6 with one from another MB6 and it was without problem. I will probably ask my friend with 1.4 Aerodeck and 1.6 factback to give me his ceiling unit to investigate on this topic.