Shaddow Posted October 11, 2012 Share Posted October 11, 2012 Hi All,I am thinking of poly bushing my car and would like to know if anyone has any experience of Energy Suspension kits? http://h-tune.co.uk/index.php?route=pro ... uct_id=989I am currently running Meister R coilovers with D2 rear lower control arms.Which bushes would I need? The kit includes shock mount bushes, but I assume I wont need these, or are they external of the coilovers?Thanks for any advise. Quote Link to comment Share on other sites More sharing options...
DeLaSoul Posted October 14, 2012 Share Posted October 14, 2012 Hi All,I am thinking of poly bushing my car and would like to know if anyone has any experience of Energy Suspension kits? http://h-tune.co.uk/index.php?route=pro ... uct_id=989I am currently running Meister R coilovers with D2 rear lower control arms.Which bushes would I need? The kit includes shock mount bushes, but I assume I wont need these, or are they external of the coilovers?Thanks for any advise.Hi,I've fitted the full kit to my car a while back (including the top mount bushes). If you already have after market LCA's then you shouldn't need those bushes, not sure on the Meister R setup, it they came with the top mounts then you shouldn't need those either. Kit is fairly easy to fit, instructions are rubbish from memory, but it's easy to work out. In terms of handling, it did tighten up the responsiveness of my car, but then going from old bushes to new harder bushes will do that anyway . Remember to use loads of the supplied grease unless you want the car to sqeak every time you go near a bump. If you want advise on getting the old bushes out of the arms then let me know. I used a sharp drill bit, metal saw, large flat bladed screw driver and a hammer but I am told you can do it on a BBQ if you are patient enough Dave Quote Link to comment Share on other sites More sharing options...
Shaddow Posted October 15, 2012 Author Share Posted October 15, 2012 Hi,Thanks for the info. Guess the cheapest way is still to buy the kit and just sell the bushes not used. (LCA's and possibly suspension top mounts.)Thanks for the tip on grease.Did it take long to do the job? Any parts particularly difficult to get out?ThanksWerner Quote Link to comment Share on other sites More sharing options...
Shaddow Posted October 15, 2012 Author Share Posted October 15, 2012 Hi,Anyone possibly be able to assist me with how much of the Kit will be used with my current set-up? Might be worth buy all individually.The kit includes the following: Front Control Arm Bushings Front Shock Mount Bushings Front Sway Bar Bushings - 26mm Rear Sway Bar Bushings - 13mm Front Coil Spring Isolators Rear Coil Spring Isolators Rear Trailing Arm Bushings Steering Rack Bushings Transmission Shifter Stabilizer Bushings (manual tranny) Ball Joint End Boots Tie Rod End BootsAt the moment I have Meister R coilovers, D2 rear Lower control arms MGZR Rear Anti-Roll BarThanksWerner Quote Link to comment Share on other sites More sharing options...
noodels Posted October 15, 2012 Share Posted October 15, 2012 maybe phone them, thought about hardrace they are correct metalastic type much better than poly insert Quote Link to comment Share on other sites More sharing options...
garymcc Posted October 15, 2012 Share Posted October 15, 2012 Will this kit fit an mb/mc? Also will it contain all the bushings needed? Thanks Quote Link to comment Share on other sites More sharing options...
Shaddow Posted October 16, 2012 Author Share Posted October 16, 2012 Hi,Just ordered the kit for my MB6. Once received and fitted, I will feed back on fitment. However Scott at H-Tune says he has sold many of these to mb6 owners and never had any negative feedback. Quote Link to comment Share on other sites More sharing options...
garymcc Posted October 20, 2012 Share Posted October 20, 2012 Great,Keep us posted mate. Cheers Quote Link to comment Share on other sites More sharing options...
marko Posted February 7, 2013 Share Posted February 7, 2013 ill take it this never went so well? Quote Link to comment Share on other sites More sharing options...
garymcc Posted February 9, 2013 Share Posted February 9, 2013 would like to know also? cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.