Thefamilywagonman Posted May 17, 2013 Share Posted May 17, 2013 I want to put banded steel wheels on my mb6. Was hoping to find some 4x 114.3's from an accord and get them banded to 8j with 195 50's on. I would appreciate any advise people can give on wheel fitment anyone tried this before? will i need spacers? also will be important to get correct drop which I want to attempt to do without coilovers. I also want to know the cheapest way to reduce some of the negative camber from the rear wheels. I'm ideally looking to use mgzs180 setup what do you think about a coilover spring conversion on the mgzs shocks? or maybe mg shocks and mb springs? whats reckon. I'm not looking for a perfect stance and to be honest still want ride compliance just don't want it to look like a 4x4http://www.civic5.com/forum/posting.php?mode=post&f=56# Quote Link to comment Share on other sites More sharing options...
Krzys Posted May 17, 2013 Share Posted May 17, 2013 Have a gander at this fella! viewtopic.php?f=141&t=12425Banded steelies on that Aerodeck so should be able to give you the info you need! Quote Link to comment Share on other sites More sharing options...
WilkesyMB6 Posted May 17, 2013 Share Posted May 17, 2013 I was about to say what Krzys said! Quote Link to comment Share on other sites More sharing options...
NIKH25 Posted May 17, 2013 Share Posted May 17, 2013 I don't know if you can do a coily spring conversion on the mg shocks but the best way to keep ride compliance is going to be with coilovers unfortunately. Mg shocks with mb springs won't really be low enough if you're running wheels that wide in my opinion. Quote Link to comment Share on other sites More sharing options...
Thefamilywagonman Posted June 1, 2013 Author Share Posted June 1, 2013 Thanks for the input so far will post more when i get time to do the digging. Quote Link to comment Share on other sites More sharing options...
Thefamilywagonman Posted June 1, 2013 Author Share Posted June 1, 2013 Just checked those pics great inspiration I would love to know what wheels were used? and who banded them how much etc looking good though just don't want to go that low i've realized you do have to lower the car to get the look right... mmm coilovers mmm money releasing itself from wallet mmm banter with wife mmm. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.