simpo Posted March 28, 2014 Share Posted March 28, 2014 Looking at some wheels but I don't under stand all the tec sh1t will these fit my mb6Et40 7.0jx17 Quote Link to comment Share on other sites More sharing options...
NIKH25 Posted March 28, 2014 Share Posted March 28, 2014 If the PCD is 4x114 yes but you may need some spigot rings. Quote Link to comment Share on other sites More sharing options...
simpo Posted March 28, 2014 Author Share Posted March 28, 2014 Yeah there 4x114 just don't understand the above lol Quote Link to comment Share on other sites More sharing options...
NIKH25 Posted March 28, 2014 Share Posted March 28, 2014 7j means 7" wide, 17 is 17" diameter, et40 is the offset (distance the face of the wheel sits from the hub iirc) standard offset is et55 so et40 will sit 15mm further out. You might need spigot rings because our cars are hubcentric which means the wheel needs to locate on the centre of the hub otherwise it won't track properly. 1 Quote Link to comment Share on other sites More sharing options...
simpo Posted March 29, 2014 Author Share Posted March 29, 2014 Sound it was the et 40 more than anything lol. Cheers 4 that Quote Link to comment Share on other sites More sharing options...
10000rpm Posted March 29, 2014 Share Posted March 29, 2014 Sound it was the et 40 more than anything lol. Cheers 4 thatif you can test one on the car that would be great, I tried a few sets of ET 40 on my car and I had major rub. In the end I got ET42 which just cleared. It depends how low the car is. Quote Link to comment Share on other sites More sharing options...
simpo Posted March 29, 2014 Author Share Posted March 29, 2014 It's only on mg zs suspension so should be ok hopefully Quote Link to comment Share on other sites More sharing options...
10000rpm Posted March 29, 2014 Share Posted March 29, 2014 You should be OK then dude. Enjoy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.