3gdean Posted September 20, 2014 Share Posted September 20, 2014 So started to buy boost parts for the DD aerodeck and hoping for a double check and input. Have read alot of forums FAq's. Pretty much a budget build and not after a specific HP Treadstone cast manifold, so I can keep AC,PS Chinese t3 3076 .82 ar (justification- cheap, getting better reviews than back in the day, can be replaced with garret internals should they fail, supplier in UK offers warranty, mate has one that takes abuse.)external wastegatebovic and 2.5'' piping joiners couplings3'' dp turbo back750cc injectorsfuel pump walboro255oil lineswater lineswideband afr gauge, other gauges boost oil pressure and tempAlloy half radPlugs NGK bkr7e gapped .3 Hondata s300 to keep it in checkCopetition clutch stage 4 Catch can? quite alot have hench brethers out the rocker, is this needed can find alot of info about this? total bill is pretty much bang on 2k Cheers all Dean 1 Quote Link to comment Share on other sites More sharing options...
Grant Posted September 20, 2014 Share Posted September 20, 2014 Sounds like a pretty good setup mate tbh. (Minus the turbo but I understand your justification, time will tell I suppose!) Think the most important part here is where you get it mapped!!?? Breather isn't necessary, it's for excess pressure but I thinkbitsbonly really needed when you start to run big boost. Quote Link to comment Share on other sites More sharing options...
3gdean Posted September 20, 2014 Author Share Posted September 20, 2014 yeh im still abit weary of the turbo but heres my mate with that turbo...drives it like that all the time!! http://youtu.be/BoJTq0PaRRA?list=UUhjsuF3cAgzZJVEzelOPVzA Quote Link to comment Share on other sites More sharing options...
wantone Posted September 20, 2014 Share Posted September 20, 2014 Sounds like its gonna be a beast mate! I will get there one day... Have i seen that silver Almera up at Phil's? If so then that turbo is huge! I'm gonna follow this thread closely Quote Link to comment Share on other sites More sharing options...
Grant Posted September 20, 2014 Share Posted September 20, 2014 Will like to see the progress mate!! Quote Link to comment Share on other sites More sharing options...
3gdean Posted September 21, 2014 Author Share Posted September 21, 2014 Yeh has been at Phil's quite a few of times, the work he does is amazing. Lad comes up from Devon to get work done by him!Manifold has arrived with the fuel pump. Will be getting hondata next pay day so can have a play still n/a. 1 Quote Link to comment Share on other sites More sharing options...
Krzys Posted September 22, 2014 Share Posted September 22, 2014 Same as Grant, just weary about the turbo, but also understand where you're coming from! No idea about them personally though as I've never had one! Suppose your mates either lucky so far or they've gotten better. Quote Link to comment Share on other sites More sharing options...
wantone Posted September 22, 2014 Share Posted September 22, 2014 Are you getting Phil to fit the kit or are you fitting it yourself and getting him to fit the pipework?I was checking out your mates motor last time i was there, he was adapting the pipework to fit that big a*s turbo! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.