jdmsaq Posted October 2, 2014 Share Posted October 2, 2014 NOTE: Thread title should have been "car pulling left" I'm currently having an issue with my steering iv raised my car up and went to a propper tracking place iv got it aligned up and my front and rear camber adjusted accordingly, however when i keep my steering dead straight on a straight road car pulls left if i move my steering slightly right then it goes straight at high speeds you have to keep the steering more to right for the car to go in straight line.. My front two tyres are the same, tyre pressure is also good.. Rear tyres are different ones. Quote Link to comment Share on other sites More sharing options...
Grant Posted October 2, 2014 Share Posted October 2, 2014 Ok before explaining too much I think you've already mentioned the cause. The rear tyres, are they the same brand? Same wear? Quote Link to comment Share on other sites More sharing options...
jdmsaq Posted October 2, 2014 Author Share Posted October 2, 2014 Excuse me? "explaining too much" I'd much rather fully explain the problem and get a correct answer from someone on here. Rear tyres are different tyres as mention above. They are different brand one has 8mm thread other one about 5-6mm. Quote Link to comment Share on other sites More sharing options...
Grant Posted October 3, 2014 Share Posted October 3, 2014 Because there are a lot of reasons it could be and I'm not going to go through them all when I think the answer has already been stated. My guess is it's the fact your running different depth of tread tyres on the back. 2 Quote Link to comment Share on other sites More sharing options...
Jayhoath83 Posted October 3, 2014 Share Posted October 3, 2014 I would defo agree with grant different tread depth could be the issue Quote Link to comment Share on other sites More sharing options...
Krzys Posted October 3, 2014 Share Posted October 3, 2014 Rears sound like the cause to me. 1 Quote Link to comment Share on other sites More sharing options...
jdmsaq Posted October 3, 2014 Author Share Posted October 3, 2014 Issue sorted it was the tyres! iv put my 14" stock alloys back on they are all four same tyres with 8mm thread all around i have no issues now. Thanks for your help guys 2 Quote Link to comment Share on other sites More sharing options...
Grant Posted October 3, 2014 Share Posted October 3, 2014 Glad it's sorted mate. And that's what I meant about not going into loads of detail about what it 'could' be when that's what I thigh it was. 2 Quote Link to comment Share on other sites More sharing options...
jdmsaq Posted October 9, 2014 Author Share Posted October 9, 2014 Ok. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.